Tandem use of solid-phase extraction and dispersive liquid–liquid microextraction for the determination of mononitrotoluenes in aquatic environment

✍ Scribed by Hamid Reza Sobhi; Hadi Farahani; Amir Kashtiaray; Mohammad Reza Farahani

• Publisher: John Wiley and Sons
• Year: 2011
• Tongue: English
• Weight: 230 KB
• Volume: 34
• Category: Article
• ISSN: 1615-9306
• DOI: 10.1002/jssc.201000529

✦ Synopsis

Abstract

Solid‐phase extraction (SPE) in tandem with dispersive liquid–liquid microextraction (DLLME) has been developed for the determination of mononitrotoluenes (MNTs) in several aquatic samples using gas chromatography‐flame ionization (GC‐FID) detection system. In the hyphenated SPE‐DLLME, initially MNTs were extracted from a large volume of aqueous samples (100 mL) into a 500‐mg octadecyl silane (C~18~) sorbent. After the elution of analytes from the sorbent with acetonitrile, the obtained solution was put under the DLLME procedure, so that the extra preconcentration factors could be achieved. The parameters influencing the extraction efficiency such as breakthrough volume, type and volume of the elution solvent (disperser solvent) and extracting solvent, as well as the salt addition, were studied and optimized. The calibration curves were linear in the range of 0.5–500 μg/L and the limit of detection for all analytes was found to be 0.2 μg/L. The relative standard deviations (for 0.75 μg/L of MNTs) without internal standard varied from 2.0 to 6.4% (n=5). The relative recoveries of the well, river and sea water samples, spiked at the concentration level of 0.75 μg/L of the analytes, were in the range of 85–118%.