𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Synthesis of SiO2thin films by sol-gel method using photoirradiation and molecular structure analysis

✍ Scribed by S. Maekawa; K. Okude; T. Ohishi


Publisher
Springer
Year
1994
Tongue
English
Weight
328 KB
Volume
2
Category
Article
ISSN
0928-0707

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Coating of polymethylmethacrylate with t
✍ R. Mizutani; Y. Oono; J. Matsuoka; H. Nasu; K. Kamiya πŸ“‚ Article πŸ“… 1994 πŸ› Springer 🌐 English βš– 858 KB

In order to improve the surface characteristics of polymethylmethacrylate (PMMA), oxide thinfilm coatings were applied using the sol-gel dip-coating technique. The Si(OC2Hs) 4 (TEOS), CH3Si(OC2Hs) 3 (MTES) or Ti(O-i-C3H7) 4 (TIP) was used as a starting material for SiO2 or TiO2 coating. The hardness

Structural and electrical characteristic
✍ Cheng-Hsing Hsu; Ching-Fang Tseng; Chun-Hung Lai; Hsin-Han Tung; Shih-Yao Lin πŸ“‚ Article πŸ“… 2010 πŸ› Elsevier Science 🌐 English βš– 558 KB

In this paper, we investigated electrical properties and microstructures of ZrTiO 4 (ZrO 2 -TiO 2 ) thin films prepared by the sol-gel method on ITO substrates at different annealing temperatures. All films exhibited ZrTiO 4 (1 1 1) and (1 0 1) orientations perpendicular to the substrate surface, an

Structural, electrical and optical prope
✍ M. Sahal; B. Hartiti; A. Ridah; M. Mollar; B. MarΓ­ πŸ“‚ Article πŸ“… 2008 πŸ› Elsevier Science 🌐 English βš– 357 KB

Thin films of intrinsic and Al-doped ZnO were prepared by the sol-gel technique associated with spin coating onto glass substrates. Zinc acetate dehydrate, ethanol and monoethanolamine were used as a starting material, solvent and stabiliser, respectively. Structural, electrical and optical characte

Coating and water permeation properties
✍ Kiyoharu Tadanaga; Kazuki Iwashita; Tsutomu Minami; Noboru Tohge πŸ“‚ Article πŸ“… 1996 πŸ› Springer 🌐 English βš– 539 KB

Nylon-6 substrates were coated with SiO2 thin films by the sol-gel method and their water permeability coefficient was evaluated. Methyltriethoxysilane (MTES) and tetraethoxysilane (TEOS) were used as starting materials. The addition of MTES to TEOS has enabled the formation of crack-free thin films