In order to improve the surface characteristics of polymethylmethacrylate (PMMA), oxide thinfilm coatings were applied using the sol-gel dip-coating technique. The Si(OC2Hs) 4 (TEOS), CH3Si(OC2Hs) 3 (MTES) or Ti(O-i-C3H7) 4 (TIP) was used as a starting material for SiO2 or TiO2 coating. The hardness
Biological activity of functionalized SiO2thin films prepared by sol-gel method
✍ Scribed by Roberta Collino; Joël Therasse; Frédéric Chaput; Jean-Pierre Boilot; Yves Levy
- Publisher
- Springer
- Year
- 1996
- Tongue
- English
- Weight
- 372 KB
- Volume
- 7
- Category
- Article
- ISSN
- 0928-0707
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
Nylon-6 substrates were coated with SiO2 thin films by the sol-gel method and their water permeability coefficient was evaluated. Methyltriethoxysilane (MTES) and tetraethoxysilane (TEOS) were used as starting materials. The addition of MTES to TEOS has enabled the formation of crack-free thin films
## Abstract GeO~2~ thin films were prepared by sol‐gel method on ITO/Glass substrate. The electrical and optical properties and the microstructures of these films were investigated with special emphasis on the effects of an annealing treatment in ambient air. The films were annealed at various temp
Transparent and conductive high preferential c-axis oriented Ni-doped ZnO (NZO) thin films as a function of Ni content have been prepared by sol-gel method using zinc acetate and nickel acetate as starting material, anhydrous ethanol and 2-methodxyethanol as solvent. The NZO thin films with a dopant