𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Substrate influence on MPCVD boron-doped homoepitaxial diamond

✍ Scribed by Habka, Nada ;Pinault, Marie-Amandine ;Mer, Christine ;Jomard, François ;Barjon, Julien ;Nesladek, Milos ;Bergonzo, Philippe

Book ID
105365167
Publisher
John Wiley and Sons
Year
2008
Tongue
English
Weight
967 KB
Volume
205
Category
Article
ISSN
0031-8965

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

We report a study of boron‐doped diamond epilayers grown on (100) HPHT diamond substrates by microwave plasma chemical vapor deposition (MPCVD) in simultaneous or successive runs. The structural and crystalline quality of the samples have been investigated by several techniques. The profiles performed by secondary ion mass spectrometry (SIMS) show the homogeneity in depth of the boron concentration in all layers. Cathodoluminescence (CL) spectroscopy indicates state‐of‐the‐art epilayers. The substrate misorientation angles have been investigated by X‐ray diffraction (XRD). Confocal micro‐Raman mapping of the full width at half‐maximum of the 1332 cm^–1^ diamond line was also preformed on all substrates. It evidences crystalline inhomogeneities that are known to be growth sectors. We show a relation between the epilayer surface morphology, observed by Nomarski optical microscopy, and the substrate crystallinity. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)

📜 SIMILAR VOLUMES

Superconductivity in boron-doped homoepi
Superconductivity in boron-doped homoepitaxial (001)-oriented diamond layers
✍ Kačmarčik, J. ;Marcenat, C. ;Cytermann, C. ;Ferreira da Silva, A. ;Ortega, L. ;G 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 245 KB

## Abstract The crystallinity and built‐in strain of diamond epilayers grown by MPCVD with boron contents __n__~B~ varying from 2 × 10^20^ to 2 × 10^21^ cm^–3^ as evaluated by SIMS are assessed by HR‐XR Diffraction. Both ac transport and ac susceptibility measurements show that the critical concent

Effect of ECR etching conditions of (100
Effect of ECR etching conditions of (100)Ib diamond substrates on homoepitaxial low boron doped diamond layer quality
✍ Volpe, Pierre-Nicolas ;Muret, Pierre ;Omnes, Franck 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 673 KB

## Abstract The effect of oxygen electron cyclotron resonance (ECR) microwave plasma etching on the crystallinity of low boron doped thin diamond films grown on Ib (100)‐oriented diamond substrates by MPCVD has been investigated with respect to the main experimental conditions: microwave power and

Influence of boron concentration on the
Influence of boron concentration on the XPS spectra of the (100) surface of homoepitaxial boron-doped diamond films
✍ Ghodbane, S. ;Ballutaud, D. ;Deneuville, A. ;Baron, C. 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 239 KB

## Abstract As‐grown (100) homoepitaxial diamond films with boron concentrations [B] from 4.6 × 10^16^ to 1.5 × 10^21^ cm^–3^ have been analysed using X‐ray photoelectron spectroscopy (XPS). Their C 1s core levels contain a dominant component around 284.17 ± 0.2 eV ascribed to sp^3^ C and a main se

Cathodoluminescence measurements on heav
Cathodoluminescence measurements on heavily boron doped homoepitaxial diamond films and their interfaces with their Ib substrates
✍ Baron, C. ;Deneuville, A. ;Wade, M. ;Jomard, F. ;Chevallier, J. 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 233 KB

## Abstract Heavily boron doped 1.8 to 2.4 µm thick homoepitaxial diamond films with 1.5 × 10^21^ cm^–3^ ≤ [B] ≤ 1.75 × 10^21^ cm^–3^ have been deposited directly on their (100) Ib substrates at 830 °C. Their cathodoluminescence spectra probe the controlled thicknesses from 0.28 to 2.8 µm, therefor