Microorganisms, including bacteria, fungi, protozoa, and microalgae, are composed predominantly of water which prohibits direct observation in a traditional scanning electron microscope (SEM). Preparation for SEM requires that microorganisms be fixed, frozen or dehydrated, and coated with a conducti
Studies of the fracture surface of rice grains using environmental scanning electron microscopy
β Scribed by Jennifer MC Dang; Les Copeland
- Publisher
- John Wiley and Sons
- Year
- 2004
- Tongue
- English
- Weight
- 506 KB
- Volume
- 84
- Category
- Article
- ISSN
- 0022-5142
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
Raw and processed grains of rice (Oryza sativa) were examined using the environmental scanning electron microscope (ESEM), which allows specimens to be imaged at high resolution with minimal preparation. Images were obtained for milled rice grains that were fractured along natural transverse fracture planes. The images showed two distinct features: a smooth surface, where the fracture plane is suggested to be between endosperm cells, and a rough, more disorganised surface, which is likely to correspond to the fracture plane passing through an endosperm cell. Individual starch granules exposed in the fractured surface ranged from 3 to 11 Β΅m in diameter. The ESEM revealed morphological differences between grains of different varieties. Parboiled rice showed a glassy fracture surface in which features of endosperm cells and starch granules were clearly recognisable but smaller than those of uncooked rice grains. Rice grains that had been heated and puffed showed a complete loss of organisational structure. The ESEM was able to capture the effect of processing treatments on the organisational structure of the grains. Copyright Β© 2004 Society of Chemical Industry
π SIMILAR VOLUMES
## Abstract The distribution of fibers in agarose gels has been studied by electronβmicroscopic examination of replicas formed from freezeβfracture surfaces. For gels set in water, the results obtained support the model proposed for the gel structure by Arnott et al. (1974) of a random array of lon
The diagnostic potential of reΓected electron energy-loss microscopy (REELM) and scanning Auger microscopy (SAM) are explored with respect to two particular aspects encountered in the surface microchemical analysis of semiconductor materials : determining the kind of coverage, i.e. whether continuou
## Abstract The efficacy of conventional high vacuum scanning electron microscopy (SEM), environmental SEM (ESEM), and confocal laser scanning microscopy techniques in the assessment of cellβmaterial interactions is compared. Specific attention is given to the application of these techniques in the