𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Advantages of environmental scanning electron microscopy in studies of microorganisms

✍ Scribed by Scott P. Collins; Robert K. Pope; Dr. Raymond W. Scheetz; Richard I. Ray; Patricia A. Wagner; Brenda J. Little


Publisher
John Wiley and Sons
Year
1993
Tongue
English
Weight
915 KB
Volume
25
Category
Article
ISSN
1059-910X

No coin nor oath required. For personal study only.

✦ Synopsis


Microorganisms, including bacteria, fungi, protozoa, and microalgae, are composed predominantly of water which prohibits direct observation in a traditional scanning electron microscope (SEM). Preparation for SEM requires that microorganisms be fixed, frozen or dehydrated, and coated with a conductive film before observation in a high vacuum environment. Sample preparation may mechanically disturb delicate samples, compromise morphological information, and introduce other artifacts. The environmental scanning electron microscope (ESEM) provides a technology for imaging hydrated or dehydrated biological samples with minimal manipulation and without the need for conductive coatings.

Sporulating cultures of three fungi, Aspergillus sp., Cunninghamella sp., and Mucor sp., were imaged in the ESEM to assess usefulness of the instrument in the direct observation of delicate, uncoated, biological specimens. Asexual sporophores showed no evidence of conidial displacement or disruption of sporangia.

Uncoated algal cells of Euglena gracilis and Spirogyra sp. were examined using the backscatter electron detector (BSE) and the environmental secondary electron detector (ESD) of the ESEM. BSE images had more clearly defined intracellular structures, whereas ESD gave a clearer view of the surface. E . gracilis cells fixed with potassium permanganate, Spirogyra sp. stained with Lugol's solution, and Saprolegnia sp. fixed with osmium tetroxide were compared using BSE and ESD to demonstrate that cellular details could be enhanced by the introduction of heavy metals. The effect of cellular water on signal quality was evaluated by comparing hydrated to critical point dried specimens. 0 1993 Wiley-Liss, Inc


πŸ“œ SIMILAR VOLUMES


Bibliography of environmental scanning e
✍ G. D. Danilatos πŸ“‚ Article πŸ“… 1993 πŸ› John Wiley and Sons 🌐 English βš– 887 KB

Two updated lists of publications on environmental scanning electron microscopy are compiled. One list contains mainly those papers dealing with the development and instrumentation, while the other deals mainly with the applications of the technique. A brief introductory summary of the field is pres

Studies of the fracture surface of rice
✍ Jennifer MC Dang; Les Copeland πŸ“‚ Article πŸ“… 2004 πŸ› John Wiley and Sons 🌐 English βš– 506 KB

## Abstract Raw and processed grains of rice (__Oryza sativa__) were examined using the environmental scanning electron microscope (ESEM), which allows specimens to be imaged at high resolution with minimal preparation. Images were obtained for milled rice grains that were fractured along natural t

Optimizing environmental scanning electr
✍ Ivan S. Uroukov; David Patton πŸ“‚ Article πŸ“… 2008 πŸ› John Wiley and Sons 🌐 English βš– 703 KB

## Abstract Electrophysiological recordings from hen embryo brain spheroidal reaggregates on penetrating 3D multielectrode arrays could be understood more easily if the surface structure was known in more detail. Electrophysiological activity, as grouped spikes in trains, is acquired from spheroids

Comparison of environmental scanning ele
✍ McKinlay, Karen J. ;Allison, Francis J. ;Scotchford, Colin A. ;Grant, David M. ; πŸ“‚ Article πŸ“… 2004 πŸ› John Wiley and Sons 🌐 English βš– 352 KB

## Abstract The efficacy of conventional high vacuum scanning electron microscopy (SEM), environmental SEM (ESEM), and confocal laser scanning microscopy techniques in the assessment of cell–material interactions is compared. Specific attention is given to the application of these techniques in the

Dynamic imaging of structural changes in
✍ Uwins, Philippa J.R.; Millar, Graeme J.; Nelson, Megan L. πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 656 KB

Polycrystalline silver catalysts are used extensively for the partial oxidation of methanol to formaldehyde, which is then primarily incorporated in the synthesis process for adhesives and resins. In order to maximize formaldehyde production it is essential to gain a comprehensive understanding of t