𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Stress–strain behavior and degradation of critical current of Bi2223 composite tapes

✍ Scribed by M Sugano; K Osamura

Publisher
Elsevier Science
Year
2004
Tongue
English
Weight
368 KB
Volume
402
Category
Article
ISSN
0921-4534

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Analysis of stress–strain behavior in Bi
Analysis of stress–strain behavior in Bi2223 composite tapes
✍ M. Sugano; K. Osamura; A. Nyilas 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 308 KB

Tensile test was carried out for Bi2223/Ag/Ag alloy composite tapes at RT, 77 and 7 K. Two yielding points are observed in the stress-strain curves. From the stress-strain behavior of the components and critical current (I c ) as a function of tensile strain, it was found that the microscopic reason

The influence of tensile strain to criti
The influence of tensile strain to critical current of Bi2223 composite tape
✍ Y. Mukai; J.K. Shin; S. Ochiai; H. Okuda; M. Sugano; K. Osamura 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 558 KB

As the stress-induced damage evolution is different from position to position in the sample, the local critical current is scattered in a sample, affecting on the overall current. The present work aimed to describe the distribution of local critical current and its relation to overall critical curre

Local and overall critical current of Bi
Local and overall critical current of Bi2223-composite tape under applied tensile and bending strains
✍ J.K. Shin; M. Fujimoto; S. Ochiai; H. Okuda; S.S. Oh 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 435 KB

Local and overall transport critical current I C and n-value at 77 K of multifilamentary Bi2223-composite tape were studied under applied tensile and bending strains. The I C and n-value of the local elements constituting of the overall sample and those of the overall sample were measured for the vo

Comparison of bending strain effect on t
Comparison of bending strain effect on the critical current degradation of Bi-2223 tapes through different measurement techniques
✍ Hyung-Seop Shin; John R.C. Dizon; Kazumune Katagiri; Tsuneo Kuroda 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 247 KB

Unlike in the tests under tension, transverse compression and torsion, the bending test of HTS tapes requires lots of time and effort since the sample should be bent or mounted successively onto sample holders having different bending radius at room temperature, and then cooled down to measure the c