𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Serrated flow in a commercial AA2036 aluminium alloy

✍ Scribed by M.C. Chaturvedi; D.J. Lloyd

Publisher
Elsevier Science
Year
1983
Weight
324 KB
Volume
58
Category
Article
ISSN
0025-5416

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

A comparative electrochemical study of c
A comparative electrochemical study of commercial and model aluminium alloy (AA5050)
✍ P. Premendra; H. Terryn; J. M. C. Mol; J. H. W. de Wit; L. Katgerman πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 German βš– 800 KB

## Abstract A comparative electrochemical study of commercially recycled AA5050 and model AA5050, in their as‐cast state, is carried out to investigate the effect of recycling and furthermore the effect of trace elements like Pb, Cu, etc on electrochemical activation and filiform corrosion (FFC) su

Serrated flow in magnesium alloy AZ91
Serrated flow in magnesium alloy AZ91
✍ C. Corby; C.H. CΓ‘ceres; P. LukÑč πŸ“‚ Article πŸ“… 2004 πŸ› Elsevier Science 🌐 English βš– 78 KB

Serrated flow has recently been observed in the ternary Mg-9 wt.% Al-1 wt.% Zn alloy AZ91 at room temperature. Binary and ternary alloys with various contents of Zn and Al have, therefore, been tested to determine the extent to which the individual solutes, Al or Zn, are responsible for the serratio

Internal Friction in Commercial Aluminiu
Internal Friction in Commercial Aluminium Alloy AW-2007
✍ Peter Palček; Jakub Porubčan; Dalibor BlaΕΎek; Zuzanka TrojanovΓ‘ πŸ“‚ Article πŸ“… 2011 πŸ› Elsevier 🌐 English βš– 648 KB

The aim of this work is to state internal friction on stress amplitude dependence in an experimental aluminium alloy AW -2007. Dependence was examined on sample made of extruded material after annealing at the temperatures of 200 Β°C and 250 Β°C. Annealing at the increased temperature has significant

Texture effect on serrated flow in 2090
Texture effect on serrated flow in 2090 Al-Li alloy
✍ Y. Z. Shen; K. H. Oh; D. N. Lee πŸ“‚ Article πŸ“… 2005 πŸ› John Wiley and Sons 🌐 English βš– 260 KB

Tensile specimens of 1Γ‚6Γ‚25 mm in gauge dimension were cut from the surface and centre of 12.7 mm thick 2090 Al-Li alloy plate, which were solution treated at 550 C for 30 min, peak-aged at 190 C for 18 h, or reversion-treated at 275 C for 2 min. The flow stress of the centre layer was higher than t