✦ LIBER ✦

Role of Metastable Pitting in Crevices on Crevice Corrosion Stabilization in Alloys 625 and 22

✍ Scribed by Kehler, B. A.; Scully, J. R.

Book ID: 120632772
Publisher: NACE International
Year: 2005
Tongue: English
Weight: 434 KB
Volume: 61
Category: Article
ISSN: 0010-9312
DOI: 10.5006/1.3278202

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The role of ohmic potential drop in the

The role of ohmic potential drop in the initiation of crevice corrosion on alloy 625 in seawater

✍ B.A. Shaw; P.J. Moran; P.O. Gartland 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 697 KB

Pitting and crevice corrosion behaviour

Pitting and crevice corrosion behaviour of high alloy stainless steels in chloride-fluoride solutions

✍ A. Pardo; M. C. Merino; E. Otero; M. D. López; M. V. Utrilla 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 German ⚖ 310 KB 👁 1 views

The localised corrosion resistance (pitting and crevice corrosion) of two high alloy stainless steels, namely superduplex (SD) and superaustenitic (SA), has been studied in chloride-fluoride solutions at pH values ranging from 2 to 6.5. The pitting potential (E pit ) and crevice potential (E cre ) h

Influence of ultrasound on pitting corro

Influence of ultrasound on pitting corrosion and crevice corrosion of SUS304 stainless steel in chloride sodium aqueous solution

✍ Rongguang Wang 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 389 KB

Admicellar Polymerization and Characteri

Admicellar Polymerization and Characterization of Thin Poly(2,2,2-trifluoroethyl acrylate) Film on Aluminum Alloys for In-Crevice Corrosion Control

✍ Le, Duc V.; Kendrick, Melissa M.; O'Rear, Edgar A. 📂 Article 📅 2004 🏛 American Chemical Society 🌐 English ⚖ 419 KB

Effect of sulphate and chloride ions on

Effect of sulphate and chloride ions on the crevice chemistry and stress corrosion cracking of alloy 600 in high temperature aqueous solutions

✍ Iuan-Jou Yang 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 660 KB

The influence of Mn compared to that of

The influence of Mn compared to that of Cr, Mo and S on the resistance to initiation of pitting and crevice corrosion in austenitic stainless steels

✍ J. Degerbeck 📂 Article 📅 1978 🏛 John Wiley and Sons 🌐 German ⚖ 919 KB

## Abstract A large number of production and laboratory heats in grades AISI 304 and 316 with normal and extremely low managanese and sulphur contents and a number of production heats in more highly alloyed austenitic stainless steels have been studied with regard to their resistance to initiation