✦ LIBER ✦

Realization and location control of attenuation poles by bandpass filters using mixed resonators

✍ Scribed by Kouji Wada; Takanobu Ohno; Osamu Hashimoto

Publisher: John Wiley and Sons
Year: 2005
Tongue: English
Weight: 710 KB
Volume: 151
Category: Article
ISSN: 0424-7760
DOI: 10.1002/eej.20074

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Pseudoelliptic bandpass filter realizati

Pseudoelliptic bandpass filter realization using attenuation pole resonator

✍ Cheng-Liang Huang; Jsung-Ta Tsai 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 107 KB

Figure 4 Measured frequency response of the improved double-layer slot-coupled directional coupler measurements. It was deduced that the measured losses and ripples are caused mainly by the resonance effect of the slot. REFERENCES 1. T. Tanaka, K. Tsunoda, and M. Aikawa, Slot-coupled directional cou

Design methodology of BPF using LC tap-c

Design methodology of BPF using LC tap-coupling λ/4 resonators and location control of attenuation poles

✍ Tomohide Kamiyama; Kouji Wada; Osamu Hashimoto 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 405 KB

A design of a narrow bandpass filter wit

A design of a narrow bandpass filter with attenuation poles using coupled lines and resonators

✍ Senji Yokokawa 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 710 KB

## Abstract This paper describes the design of a narrow bandpass filter with attenuation poles used at high frequencies. The filter circuit is new and consists of coupled lines and resonators. This paper analyzes how the filter characteristics vary with these circuit parameters. A bandpass filter d