Pseudoelliptic bandpass filter realization using attenuation pole resonator
β Scribed by Cheng-Liang Huang; Jsung-Ta Tsai
- Publisher
- John Wiley and Sons
- Year
- 1999
- Tongue
- English
- Weight
- 107 KB
- Volume
- 23
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
β¦ Synopsis
Figure 4 Measured frequency response of the improved double-layer slot-coupled directional coupler measurements. It was deduced that the measured losses and ripples are caused mainly by the resonance effect of the slot. REFERENCES 1. T. Tanaka, K. Tsunoda, and M. Aikawa, Slot-coupled directional couplers between double-sided substrate microstrip lines and their Ε½ . applications, IEEE Trans Microwave Theory Tech 36 1988 , 1752α1757. 2. C.-M. Tsai and K.C. Gupta, A generalized model for coupled lines and its applications to two-layer planar circuits, IEEE Trans Ε½ .
π SIMILAR VOLUMES
## Abstract This paper describes the design of a narrow bandpass filter with attenuation poles used at high frequencies. The filter circuit is new and consists of coupled lines and resonators. This paper analyzes how the filter characteristics vary with these circuit parameters. A bandpass filter d
## Abstract Small size and rapid attenuation rate are two important factors in the selection of bandpass filters for practical applications. This paper describes a monoblock and modified Chebyshevβtype bandpass filter with an attenuation pole in the lower stopband. The equivalent circuit consists o
## Abstract A tapped bandpass filter composed of two coupled steppedβimpedance resonators (SIRs) is proposed. The two resonators are arranged in different plane. The volume of proposed filter is about 60% of that of conventional filter. We investigate the filtering characteristics using both networ