Characterization of TiO2-, ZrO2-and Al2O3-Supported Iron Catalysts as Used for CO2 Hydrogenation. -The catalytic performance in the synthesis of hydrocarbons others than methane from CO2 and H2 of the title catalysts, prepared by direct reduction in H2 atmosphere at 773 K of precursors obtained by i
Production of Al2O3–TiO2 catalyst supports with controlled properties using a co-precipitation process
✍ Scribed by Guillaume Mouret; Kévin Mozet; Hervé Muhr; Edouard Plasari; Michel Martin
- Publisher
- Elsevier Science
- Year
- 2009
- Tongue
- English
- Weight
- 934 KB
- Volume
- 190
- Category
- Article
- ISSN
- 0032-5910
No coin nor oath required. For personal study only.
✦ Synopsis
The quality of Al 2 O 3 -TiO 2 mixed oxides produced in continuous mode by using two original rapid mixers (impinging jets and sliding surface mixing devices) as precipitation reactors are compared with those obtained by a standard stirred tank. The properties of agglomerate particles strongly depend on the operating conditions and particularly on the type of precipitator used for their production.
📜 SIMILAR VOLUMES
the initial step in the incorporation (1-4). This radioactive Adsorption of Co(II) ions on metal oxides is related to radioacpollution causes an exposure problem to plant workers and tive 60 Co(II) (de)contamination of nuclear power plants, Co(II) results in large amounts of bulky radioactive waste
The synthesis of TiOs-Al,O, mixed oxides catalytic supports with a TiOs/ (TiOs + Also,) molar ratio equal to 0.5 was made, at various experimental conditions, by the co-precipitation of the corresponding metallic isopropoxides using ammonium carbonate as pore regulating agent. The influence of the p