𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Processing and microstructure of PCL/clay nanocomposites

✍ Scribed by Leandro N. Ludueña; Vera A. Alvarez; Analía Vazquez

Publisher
Elsevier Science
Year
2007
Tongue
English
Weight
822 KB
Volume
460-461
Category
Article
ISSN
0921-5093

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Mill processing and properties of rubber
Mill processing and properties of rubber–clay nanocomposites
✍ M. Nadeem Qureshi; H. Qammar 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 796 KB

The dispersion of nanoscale composites in elastomers, which generally have higher molecular weight and viscosity as compared to plastics, is a challenge. Several techniques have been proposed for improvement of the dispersion of nanofillers in the polymers [1]. For example, the interaction of natura

Intercalated Polycarbonate/Clay Nanocomp
Intercalated Polycarbonate/Clay Nanocomposites: Nanostructure Control and Foam Processing
✍ Masaki Mitsunaga; Yasuhito Ito; Suprakas Sinha Ray; Masami Okamoto; Katsuhiko Hi 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 212 KB

## Abstract Intercalated polycarbonate (PC)/clay nanocomposites (PCCN)s have been prepared successfully through the melt intercalation method in the presence of a compatibilizer. The internal structure and morphology of the PCCNs has been established by using wide‐angle X‐ray diffraction (WAXD) ana

Mechanical properties of polypropylene/c
Mechanical properties of polypropylene/clay nanocomposites: Effect of clay content, polymer/clay compatibility, and processing conditions
✍ J. A. Tarapow; C. R. Bernal; V. A. Alvarez 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 414 KB 👁 2 views

## Abstract In this work, polypropylene/clay nanocomposites with 0.5, 1, 3, and 5 wt % of montmorillonite (MMT) (unmodified clay) were prepared by intensive mixing at 50 rpm and 10 min of mixing. For the highest clay content (5 wt %), the initial materials or the processing conditions were changed