𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Preparation of CuAlO2thin films with high transparency and low resistivity using sol–gel method

✍ Scribed by Yang Ren; Gaoyang Zhao; Chenxi Zhang; Yuanqing Chen

Publisher
Springer
Year
2011
Tongue
English
Weight
335 KB
Volume
61
Category
Article
ISSN
0928-0707

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Coating of polymethylmethacrylate with t
Coating of polymethylmethacrylate with transparent SiO2thin films by a sol-gel method
✍ R. Mizutani; Y. Oono; J. Matsuoka; H. Nasu; K. Kamiya 📂 Article 📅 1994 🏛 Springer 🌐 English ⚖ 858 KB

In order to improve the surface characteristics of polymethylmethacrylate (PMMA), oxide thinfilm coatings were applied using the sol-gel dip-coating technique. The Si(OC2Hs) 4 (TEOS), CH3Si(OC2Hs) 3 (MTES) or Ti(O-i-C3H7) 4 (TIP) was used as a starting material for SiO2 or TiO2 coating. The hardness

Preparation of ZnO thin film by the sol-
Preparation of ZnO thin film by the sol-gel method using low temperature ozone oxidation
✍ Ehara, Takashi ;Ueno, Takaaki ;Abe, Junya 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 262 KB

## Abstract Zinc oxide thin films have been prepared by the sol–gel method from a 2‐methoxyethanol solution of zinc acetate dihydrate on SiO~2~ substrates using air, pure oxygen, and 1% ozone in oxygen as oxygen source. In the cases where air or oxygen was used as the oxygen source for thermal anne