Here the MCFC electrode support is constructed from a high-porosity reticulated foam on the face of the anode or the cathode facing away from the electrolyte matrix, to form multiple pores. The
Power amplifier module with Integrated Power Control
- Publisher
- Elsevier Science
- Year
- 2001
- Tongue
- English
- Weight
- 97 KB
- Volume
- 14
- Category
- Article
- ISSN
- 0961-1290
No coin nor oath required. For personal study only.
✦ Synopsis
has opened a design centre in the
📜 SIMILAR VOLUMES
## Abstract This paper describes the design and fabrication of a 0.7‐mm‐thick compact Ka‐band low‐temperature co‐fired ceramic (LTCC) power‐amplifier module, integrating the 0.25‐μm PHEMT MMIC power‐amplifier design. The LTCC module, designed for a surface‐mounting structure, and composed of a five
## Abstract This paper presents the design of a high‐efficiency LDMOS power‐amplifier module (PAM) at the 880‐MHz band. The nonlinear parameters for the LDMOS FET are obtained through the modified SPICE level‐3 static and large‐signal analyses. It shows an output power of 30.2 dBm and power‐added e
## Abstract This article presents the first demonstration of a broadband GaN‐on‐Si power amplifier module integrated in a low temperature cofired ceramic (LTCC) technology.The active device of the amplifier is a low cost Si‐based AlGaN/GaN high electron mobility transistor. Both the input and the o
## Abstract In this paper, a small‐footprint, athermal, hitless, reconfiguration‐optical add‐drop module with an inherently integrated optical power controller is presented. This unique multiplexer cannot only add‐drop any wavelength among designed wavelength channels without interrupting through t