𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Polymerization of butene-1 with highly active MgCl2- supported TiCl4 catalyst system

✍ Scribed by N. Kashiwa; J. Yoshitake; A. Mizuno; T. Tsutsui


Publisher
Elsevier Science
Year
1987
Tongue
English
Weight
460 KB
Volume
28
Category
Article
ISSN
0032-3861

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Kinetic study of ethylene polymerization
✍ Il Kim; Jae Ha Kim; Seong Ihl Woo πŸ“‚ Article πŸ“… 1990 πŸ› John Wiley and Sons 🌐 English βš– 846 KB

The kinetics of ethylene polymerization with TiCl,/MgCl,/SiO, has been investigated in the range of temperatures between 40 and 90Β°C and in the range of ethylene pressures between 4 and 12.4 kg/cm2. The role of MgCI, was discussed from the dependence of the Mg/Ti ratio on the catalytic activity. The

Propene polymerization with MgCl2-suppor
✍ Chun B. Yang; Cheng C. Hsu πŸ“‚ Article πŸ“… 1995 πŸ› John Wiley and Sons 🌐 English βš– 814 KB

Slurry polymerization of propene using MgC1,-supported TiClJdioctylphthalate catalysts were carried out in a semibatch reactor at a constant pressure to examine the effects of polymerization conditions on catalyst activity and polymer isotacticity. The catalysts were prepared at 80, 90, and 105"C, w

Polymerization of olefins with the TiCl4
✍ Luiz Claudio de Santa Maria; Kazuo Soga; Takeshi Shiono πŸ“‚ Article πŸ“… 1994 πŸ› John Wiley and Sons 🌐 English βš– 402 KB

## Abstract MgCl~2~/TiCl~4~/SiO~2~ catalysts were prepared by treating TiCl~4~/SiO~2~ with MgCl~2~ Β· 2THF (THF: tetrahydrofuran) at different Mg/Ti ratios. The catalysts were analysed by X‐ray, electron spin resonance (ESR), atomic absorption spectrometry to determine the crystal structure, oxidati

Aspects of hydrogen activation in propen
✍ John C. Chadwick; Giampiero Morini; Enrico Albizzati; Giulio Balbontin; Ines Min πŸ“‚ Article πŸ“… 1996 πŸ› John Wiley and Sons 🌐 English βš– 478 KB

## Abstract ^13^C NMR analysis of the chain‐end distribution of poly(propylenes) prepared using the highly active catalyst system MgCl~2~/TiCl~4~/dietherβ€”AlEt~3~ has revealed particularly high proportions of butyl chain‐ends in polymers prepared at relatively low hydrogen pressures. This indicates

Copolymerization of styrene and 1-butene
✍ Feng Gao; Shangan Lin πŸ“‚ Article πŸ“… 1996 πŸ› John Wiley and Sons 🌐 English βš– 511 KB

## Abstract Copolymerization of styrene and 1‐butene was first conducted at 50Β°C with a novel Ti catalyst by using Al(iBu)~3~ (iBu = isobutyl) as cocatalyst. The Ti catalyst is composed of MgCl~2~/TiCl~4~/PhCOOEt/Ph~2~SiCl~2~/SiCl~4~/NdCl~__x__~(OR)~__y__~/Al(iBu)~3~ (assigned as SN‐1 catalyst), wh