✦ LIBER ✦

Plastic and dissipated work and stored energy

✍ Scribed by A. Chrysochoos; O. Maisonneuve; G. Martin; H. Caumon; J.C. Chezeaux

Publisher: Elsevier Science
Year: 1989
Tongue: English
Weight: 695 KB
Volume: 114
Category: Article
ISSN: 0029-5493
DOI: 10.1016/0029-5493(89)90110-6

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Stored energy and plastic volume change

✍ T.W. Wright 📂 Article 📅 1982 🏛 Elsevier Science 🌐 English ⚖ 169 KB

Stored energy of cold work in polystyren

Stored energy of cold work in polystyrene

✍ Benjamin Tai-An Chang; J. C. M. Li 📂 Article 📅 1988 🏛 Society for Plastic Engineers 🌐 English ⚖ 500 KB

The stored energy of cold work and its r

The stored energy of cold work and its relation to work softening

✍ A.L Titchener; M.B Bever 📂 Article 📅 1960 🏛 Elsevier Science ⚖ 632 KB

One set of wires of an 82.6 Au-17.4 Ag (wt.%) alloy was drawn at -195°C to a true strain of 0.62. A second set, after drawing at -195°C to a strain of 0.62, was annealed at room temperature. Two further sets were drawn at -195°C to a strain of 0.62, brought to room temperature and drawn to total st

Stored energy and structural failure

✍ C. Ruiz 📂 Article 📅 1985 🏛 Springer Netherlands 🌐 English ⚖ 350 KB

Comparative assessment of dissipated ene

Comparative assessment of dissipated energy and other fatigue criteria

✍ Alexander M. Korsunsky; Daniele Dini; Fionn P.E. Dunne; Michael J. Walsh 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 571 KB

Amongst a large number of fatigue criteria proposed for the prediction of crack initiation in thermo-mechanical fatigue, various approaches have been found to be particularly useful for certain categories of material over specific domains of temperature and cyclic strain. However, no particular appr

The stored energy of cold work in relati

The stored energy of cold work in relation to grain size and other variables

✍ A.L. Titchener 📂 Article 📅 1961 🏛 Elsevier Science ⚖ 510 KB

## Concerning the mechanism of diffusion in liquids* In tx recent Letter to the Editor, Gordon(r) criticized a theory of liquid metal diffusion proposed by the writer.@) His criticism was concerned with the fact that very small average diffusion jump distances are predicted by the theory and as a