𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Planar rectangular split ring shape band-pass structures

✍ Scribed by Jan-Dong Tseng; Wei-Geo Chang

Book ID
102518843
Publisher
John Wiley and Sons
Year
2007
Tongue
English
Weight
280 KB
Volume
49
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

A planar rectangular split ring shaped band‐pass structure is proposed and analyzed by coupled line equivalent circuit instead of commonly used LC resonator circuit. The derived results were then used to design two‐ and three‐cascaded rectangular split ring shape structures. Two prototypes were both designed at center frequency at 2.45 GHz, simulated by microwave simulators: IE3D and microwave office, and fabricated on FR‐4 substrate. The simulated and experimental results show good agreement within 0–10 GHz. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 49: 2520–2523, 2007; Published online in Wiley InterScience (www.interscience.wiley.com) DOI 10.1002/mop.22794

📜 SIMILAR VOLUMES

Novel band-pass filters using complement
Novel band-pass filters using complementary split ring resonators
✍ Dong-sheng La; Ying-hua Lu 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 407 KB

## Abstract Band‐pass filters using complementary split ring resonator (CSRR) are proposed in this article. Two‐cascaded and three‐cascaded band‐pass filters using CSRR are designed, simulated, fabricated and measured. The resonant characteristics of the cascaded band‐pass filters show their advant

Ultra wide band pass filters (UWBPF) bas
Ultra wide band pass filters (UWBPF) based on complementary split rings resonators
✍ J. Bonache; F. Martín; J. García-García; I. Gil; R. Marqués; M. Sorolla 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 115 KB

## Abstract In this work, a new strategy for the design of microstrip filters with ultra‐wide bandwidths is proposed. This is based on the combination of square‐shaped complementary split‐ring resonators (CSRRs) etched in the ground plane and grounded stubs. Coupling between adjacent resonators is

Enhanced gain dual band patch antenna ba
Enhanced gain dual band patch antenna based on complementary rectangular split-ring resonators
✍ N. Ortiz; F. Falcone; M. Sorolla 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 579 KB

## Abstract A simple and successful dual band patch vertical polarized rectangular antenna design is presented. The dual band antenna is designed etching a complementary rectangular split ring resonator in the patch of a conventional rectangular patch antenna. Furthermore, a miniaturization of the

Dual-band planar rectangular ring microw
Dual-band planar rectangular ring microwave bandpass filter using high permittivity substrate
✍ Cheng-Hsing Hsu; Chia-Hsien Lin; Sen-Hung Huang; Chung-I G. Hsu; Cheng-Chi Yu; H 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 154 KB

## Abstract Dual‐band planar bandpass filter, using two microstrip rectangular ring resonators, is proposed for wireless LAN system such as IEEE 802.11 systems (2.4 or 5 GHz). The miniaturized bandpass filter is implemented using a high permittivity dielectric substrate. The full‐wave simulator IE3

Band-pass filter with broad-side coupled
Band-pass filter with broad-side coupled triple split-ring resonator using left-handed metamaterial
✍ Ki-Cheol Yoon; Jeonggon Harrison Kim; Jong-Chul Lee 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 354 KB

## Abstract This article presents a new bandpass filter (BPF) with a broad‐side coupled triple split‐ring resonator (T‐SRR) using left‐handed metamaterial on a Teflon substrate.Then, by replacing the series quarter‐wavelength connecting lines with the equivalent T‐shaped line, a compact BPF with a