✦ LIBER ✦

Photo-inhibition of pitting corrosion on types 304 and 316 stainless steels in chloride-containing solutions

✍ Scribed by Carmel B. Breslin; Digby D. Macdonald; Elzbieta Sikora; Janusz Sikora

Publisher: Elsevier Science
Year: 1997
Tongue: English
Weight: 797 KB
Volume: 42
Category: Article
ISSN: 0013-4686
DOI: 10.1016/0013-4686(96)00178-8

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Stochastic and deterministic behaviours

Stochastic and deterministic behaviours of 316 stainless steel pitting corrosion in phosphate-borate buffer containing sodium chloride

✍ R.C. Salvarezza; N. de Cristofaro; C. Pallotta; A.J. Arvia 📂 Article 📅 1987 🏛 Elsevier Science 🌐 English ⚖ 613 KB

The pitting corrosion of 316 stainless steel (SS) in phosphate-borate buffer (pH 8 .00) containing 0.5 M NaCl at 25'C is studied through current transients run under a constant potential step, potentiodynamic runs and scanning electron microscopy . According to the potential and time windows differe

Pitting and crevice corrosion behaviour

Pitting and crevice corrosion behaviour of high alloy stainless steels in chloride-fluoride solutions

✍ A. Pardo; M. C. Merino; E. Otero; M. D. López; M. V. Utrilla 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 German ⚖ 310 KB 👁 1 views

The localised corrosion resistance (pitting and crevice corrosion) of two high alloy stainless steels, namely superduplex (SD) and superaustenitic (SA), has been studied in chloride-fluoride solutions at pH values ranging from 2 to 6.5. The pitting potential (E pit ) and crevice potential (E cre ) h

Potentiokinetic Criteria relevant to the

Potentiokinetic Criteria relevant to the pitting corrosion of stainless steels in chloride solutions

✍ Dr. R. Štefec 📂 Article 📅 1982 🏛 John Wiley and Sons 🌐 German ⚖ 333 KB 👁 1 views

## Abstract The adequacy of 7 parameters of potentiokinetic curves for evaluating the resistance to pitting corrosion in sodium chloride solutions was quantitatively assessed by reference to immersion testing in ferric chloride solutions for 11 type CrNi (MoTiCu) stainless steels on the basis of 31

Passivity and Pitting Susceptibility of

Passivity and Pitting Susceptibility of type 304 Stainless Steel in Acidic Sulphate Solutions

✍ S. S. El-Egamy; W. A. Badawy; H. Shehata 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 158 KB

On the Initiation process of pitting cor

On the Initiation process of pitting corrosion on austenitic stainless steel in chloride solutions

✍ A. A. Seys; A. A. van Haute; M. J. Brabers 📂 Article 📅 1974 🏛 John Wiley and Sons 🌐 German ⚖ 939 KB

## Abstract A literature survey has lead to the conclusion that a theory which postulates an increased anodic reactivity on a local site in the passive film is very probable. Experiments have been set up to confirm these suggestions. By means of the electron‐microanalyser, it is shown that CI^−^ion

Polarization resistance studies on Corro

Polarization resistance studies on Corrosion inhibition of 304 austenitic and 430 ferritic stainless steels in H2SO4 solutions

✍ Hamid A. Al-Megren; Dr. Abdulaziz A. Al-Suhybani 📂 Article 📅 1993 🏛 John Wiley and Sons 🌐 English ⚖ 527 KB

## Abstract The corrosion of 304 Austenitic and 430 Ferritic Stainless steels in sulphuric acid solutions has been investigated using polarization resistance (Rp) technique. Different organic inhibitors were used in this study and these contain an allylic group (CH~2~  CH~2~ ). The effect of acid