✦ LIBER ✦

Passivity and Pitting Susceptibility of type 304 Stainless Steel in Acidic Sulphate Solutions

✍ Scribed by S. S. El-Egamy; W. A. Badawy; H. Shehata

Publisher: John Wiley and Sons
Year: 2001
Tongue: English
Weight: 158 KB
Volume: 32
Category: Article
ISSN: 0933-5137
DOI: 10.1002/1521-4052(200109)32:9<737::aid-mawe737>3.0.co;2-t

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Pitting corrosion transformation of SUS3

Pitting corrosion transformation of SUS304 stainless steel in lithium bromide solution at high temperature

✍ H.-X. Chen; X.-H. Ma; J.-B. Chen; S.-S. Bo 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 German ⚖ 207 KB

## Abstract The foundational data and rules of SUS304 corrosion in aqueous lithium bromide solution at 150–200 °C have been investigated by means of weight loss in this paper. The Taguchi method was chosen to investigate the effects of variables on corrosion at higher temperature. Concentration of

Inhibition of 304 stainless steel corros

Inhibition of 304 stainless steel corrosion in acidic solution by Ferula gumosa (galbanum) extract

✍ M. Behpour; S. M. Ghoreishi; M. Khayat Kashani; N. Soltani 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 German ⚖ 129 KB 👁 1 views

## Abstract The inhibition effect of the extract of galbanum (__Ferula gummosa__ Boiss.) on the corrosion of 304 stainless steel in 2 M HCl solution was studied by weight loss measurements, Tafel polarization, and electrochemical impedance spectroscopy (EIS) methods. It was found that the inhibitio

Pitting and crevice corrosion behaviour

Pitting and crevice corrosion behaviour of high alloy stainless steels in chloride-fluoride solutions

✍ A. Pardo; M. C. Merino; E. Otero; M. D. López; M. V. Utrilla 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 German ⚖ 310 KB 👁 1 views

The localised corrosion resistance (pitting and crevice corrosion) of two high alloy stainless steels, namely superduplex (SD) and superaustenitic (SA), has been studied in chloride-fluoride solutions at pH values ranging from 2 to 6.5. The pitting potential (E pit ) and crevice potential (E cre ) h

Impedance of Cr18Ni10 stainless steel in

Impedance of Cr18Ni10 stainless steel in sulphate solutions after a low-temperature plasma nitriding

✍ J. Flis; M. Kuczynska 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 German ⚖ 235 KB 👁 1 views

## Abstract The 00Cr18Ni10 stainless steel was examined before and after plasma nitriding in a 80%N~2~/20%H~2~ gas mixture at 425°C for 30 h, resulting in the formation of a supersaturated solid solution of nitrogen in austenite (__S__ phase) with 12.9 wt.% N at the surface. Electrochemical measure

Positron Annihilation Study in the Early

Positron Annihilation Study in the Early Stage of Fatigue in Type 304 Stainless Steel

✍ Hori, F. ;Oshima, R. 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 181 KB 👁 1 views

Positron annihilation lifetime and Doppler broadening measurements have been performed to study the early stage of fatigue in type 304 stainless steel at various positions of samples at room temperature. Both the average lifetime of positron and the S parameter have increased with increasing number

The synergy between deformation and anod

The synergy between deformation and anodic dissolution of an austenitic stainless steel in acidic chloride solution

✍ H. Yanliang 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 German ⚖ 130 KB 👁 1 views

## Abstract In corrosion medium, metals can deform under tensile stress and form a new active surface with the anodic dissolution of the metals being accelerated. At the same time, the anodic dissolution may accelerate the deformation of the metals. The synergy can lead to crack nucleation and deve