## Abstract A low profile planar antenna, comprising a driven element coupled with one or more parasitic elements is proposed. The design is suitable to be used into a handheld device due to the antenna reduced dimensions (33 Γ 15 Γ 1 mm^3^). To facilitate the integration of other components, such
Pentaband internal antenna for handset communication devices
β Scribed by P. Ciais; C. Luxey; A. Diallo; R. Staraj; G. Kossiavas
- Publisher
- John Wiley and Sons
- Year
- 2006
- Tongue
- English
- Weight
- 384 KB
- Volume
- 48
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
β¦ Synopsis
A compact pentaband planar inverted-F antenna (PIFA) suitable for handheld terminals is presented. This antenna is made of capacitively loaded shorted patches, a slot, and an efficient antennachassis combination to achieve multiband and wideband performances Figure 3 Measured radiation pattern in three orthogonal x-y, x-z, y-z planes at 4, 6, and 8 GHz
π SIMILAR VOLUMES
## Abstract In this article, a novel compact internal wideband planar inverted Fβantenna (PIFA) was designed. The proposed antenna consisted of a main patch with strip, rectangular slot, and shorting strip and occupied the total volume of 36 Γ 18 Γ 6 mm^3^. The dual band characteristic was achieved
## Abstract This letter presents a monopole type pentaβband internal antenna using a parasitic element. The proposed antenna, with the small size of 37 Γ 8 Γ 3.5 mm^3^ can provide sufficient bandwidth to cover the GSM(850/900), DCS, PCS, and WCDMA bands. The measured impedance bandwidth (VSWR β€ 3)
## Abstract The development of a small electrical antenna plays an important role in the rapidly growing mobile communication market. This paper presents the design of a novel small and wideband planar inverted Fβantenna that simultaneously covers the GSM900/GPS/DCS1800/DCS1900/IMT2000/WLAN/DMB ser
and the input impedance Z in of the ETLNUTL can be determined by using Eq. ( 35) as Z in Ο 1.527 Οͺ j2.197β. Alternatively, the input impedance Z in can be determined analytically using Eq. ( 27) as Comparing these results, it is found that both are in very good agreement. Thus, this example illust