Fluoridated hydroxyapatite (FHA) coatings were deposited onto Ti6Al4V substrates by sol-gel dip-coating method. X-ray photoelectron spectroscopy results showed that fluoride ions were successfully incorporated into the hydroxyapatite (HA) lattice structure. The dissolution behavior in Tris-buffered
Osteoblastic cell response on magnesium-incorporated apatite coatings
✍ Scribed by Guochao Qi; Sam Zhang; Khiam Aik Khor; Sun Woh Lye; Xianting Zeng; Wenjian Weng; Chunming Liu; Subbu S. Venkatraman; Lwin Lwin Ma
- Publisher
- Elsevier Science
- Year
- 2008
- Tongue
- English
- Weight
- 686 KB
- Volume
- 255
- Category
- Article
- ISSN
- 0169-4332
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract Porous scaffold materials that can provide a framework for the cells to adhere, proliferate, and create extracellular matrix are considered to be suitable materials for bone regeneration. Interconnected porous chitosan scaffolds were prepared by freeze‐drying method, and were mineralize
## Abstract Dicalcium silicate coating was deposited onto a Ti‐6Al‐4V substrate using plasma‐spraying technology. The coating was immersed in simulated body fluid (SBF) for 1, 3, 6, 12, 24, and 48 h to investigate early apatite formation on the coating. Osteoblasts were also seeded onto the surface
## Abstract Cyclic stretching experiments on osteoblast‐like cells have proven to be a useful tool in understanding the underlying mechanisms of load transduction at the bone–implant surface. However, most experimental setups use silicone rubber substrates, which are atypical for orthopedic and den
## Abstract Different types of calcium phosphate compounds [calcium‐deficient apatite (CDA); beta‐tricalcium phosphate (β‐TCP); biphasic calcium phosphate (BCP)] are commercially available for medical and dental applications as bone substitute materials. Most of the reported __in vitro__ studies on
An artificial material coated with a laminin-apatite composite layer on its surface would be useful as a percutaneous device with cell-adhesion properties and good biocompatibility. The present authors recently prepared such a composite by a liquid-phase coating process in which a surface-modified m