𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Optimization of culturing conditions ofPorphyridium cruentumusing uniform design

✍ Scribed by Juan Wang; Bilian Chen; Xiaozhen Rao; Jian Huang; Min Li

Publisher
Springer
Year
2007
Tongue
English
Weight
161 KB
Volume
23
Category
Article
ISSN
1573-0972

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Optimization of polymerase chain reactio
Optimization of polymerase chain reaction-amplified conditions using the uniform design method
✍ Yang Cao; Yuanyuan Zheng; Baishan Fang πŸ“‚ Article πŸ“… 2004 πŸ› Wiley (John Wiley & Sons) 🌐 English βš– 92 KB

## Abstract Polymerase chain reaction (PCR) is a key procedure in modern molecular biology but may be adversely affected by many factors and it is difficult to optimize reaction conditions; a technically simple and effective method to set up an optimal PCR‐amplified system is required. Uniform desi

Optimization of cordycepin extraction fr
Optimization of cordycepin extraction from cultured Cordyceps militaris by HPLC-DAD coupled with uniform design
✍ Jiang-Feng Song; Chun-Quan Liu; Da-Jing Li; Bang-Quan Jin πŸ“‚ Article πŸ“… 2007 πŸ› Wiley (John Wiley & Sons) 🌐 English βš– 245 KB

## Abstract **BACKGROUND:** Uniform design was used to optimize the ultrasonic‐assisted extraction of cordycepin from cultured __Cordyceps militaris__. The peak area of cordycepin identified using high performance liquid chromatography (HPLC) at a detection wavelength of 260 nm was considered the d

Optimal design of uniform non-homogeneou
Optimal design of uniform non-homogeneous vibrating beams
✍ V.K. Gupta; P.N. Murthy πŸ“‚ Article πŸ“… 1978 πŸ› Elsevier Science 🌐 English βš– 456 KB

The problem of optimal design of unifornl non-homogeneous beams undergoing transverse vibrations is investigated. The optimal longitudinal modulus distribution is sought to produce the maximum value of fundamental frequency for a beam of given mass and geometry. Governing equations are obtained by u

Optimization of injection molding design
Optimization of injection molding design. Part II: Molding conditions optimization
✍ Ioannis Pandelidis; Qin Zou πŸ“‚ Article πŸ“… 1990 πŸ› Society for Plastic Engineers 🌐 English βš– 867 KB

## Abstract The quality of an injection molded part is affected by many factors. These include geometric parameters associated with the mold design and the cooling system design as well as process parameters such as the molding conditions during the filling phase. In the companion paper, the proble