𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Numerical and experimental study of a rectangular slot antenna for UWB communications

✍ Scribed by Gino Sorbello; Mario Pavone; Luca Russello


Publisher
John Wiley and Sons
Year
2005
Tongue
English
Weight
180 KB
Volume
46
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.


📜 SIMILAR VOLUMES


Numerical and experimental analysis of a
✍ Gino Sorbello; Fabrizio Consoli; Sebastiano Barbarino 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 200 KB 👁 1 views

structure device causes refractive-index perturbation in the radial direction of the fiber; hence, only asymmetrical cladding modes (LP11, LP12, LP13, . . .) will be coupled from the fundamental mode. To produce a broadband filter along the CϩL band, a grating device as long as 2.1 mm was used. The

Design of a microstip fed step slot ante
✍ M. Gopikrishna; Deepti Das Krishna; C. K. Aanandan; P. Mohanan; K. Vasudevan 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 374 KB 👁 1 views

## Abstract The design and performance of a stepped slot printed monopole antenna in the ultrawideband is presented in this article. Multiple resonances generated by the stepped slot geometry are matched in the ultrawideband using a modified microstrip feed. The impedance bandwidth (SWR < 2) of the

Experimental study of a large bandwidth
✍ Yong-Woong Jang 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 137 KB

## Abstract A large‐band rectangular‐shaped microstrip‐fed circular slot antenna is studied in this Letter. In this case, many design parameters of this antenna lead to good impedance matching in a wide frequency band. Although the use of a high‐relative‐permittivity (ε~r~ = 4.3) substrate usually

Experimental implementation of a wideban
✍ Yong-Woong Jang 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 84 KB 👁 1 views

## Abstract The experimental implementation of a T‐shaped microstrip‐fed printed 8‐element slot‐array antenna is presented in this paper. Although the use of a high relative permittivity (ε~__r__~ = 4.3) substrate usually restricts the operation bandwidth, the radiation resistance also has a low va

A study on rectangular microstrip antenn
✍ R. M. Vani; S. F. Farida; P. V. Hunagund 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 215 KB 👁 1 views

## Abstract The compact configuration of a microstrip antenna can be realized by embedding suitable slots on the radiating patch. In this paper, a typical configuration of slots is studied by putting group of vertical slots near radiating edge with inset feed and the experimental results are presen

Design and characteristics of a small U-
✍ Tan-Phu Vuong; Anthony Ghiotto; Yvan Duroc; Smail Tedjini 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 481 KB 👁 1 views

## Abstract This article introduces the design of a small (30 mm × 35 mm × 1.6 mm) band‐rejected U‐slotted planar antenna on FR4 substrate having a relative permittivity of ε~r~ = 4.4 for Impulse Radio Ultra Wide Band (IR‐UWB) systems. The antenna is fed by a microstrip line and rejects the frequen