✦ LIBER ✦

Nonlinear approaches to the design of microwave power amplifiers

✍ Scribed by Paolo Colantonio; Franco Giannini; Ernesto Limiti

Publisher: John Wiley and Sons
Year: 2004
Tongue: English
Weight: 250 KB
Volume: 14
Category: Article
ISSN: 1096-4290
DOI: 10.1002/mmce.20038

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Harmonic-loaded microwave power amplifie

Harmonic-loaded microwave power amplifiers: Nonlinear design procedure

✍ Giannini, Franco ;Leuzzi, Giorgio ;Limiti, Ernesto ;Scucchia, Lucio 📂 Article 📅 1995 🏛 John Wiley and Sons 🌐 English ⚖ 506 KB

## Abstract A nonlinear design procedure for microwave power amplifiers is presented. The methodology makes use of a complete nonlinear model for the active device and an exact nonlinear analysis method. Suitable harmonic loading conditions for efficient power performance are imposed simultaneously

Nonlinear modeling of class-E microwave

Nonlinear modeling of class-E microwave power amplifiers

✍ Milica Marković; Aron Kain; Zoya Popović 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 223 KB

Verification of the Materka-Kacprzak model suitable for highly saturated MESFET operation is presented. To examine the validity of the model, a broadband microwave class-E power amplifier was designed and fabricated using a Siemens CLY5 ( ) MESFET transistor. A 200 MHz bandwidth 22% from 0.82 to 1.0

Systematic nonlinear control approach to

Systematic nonlinear control approach to a power factor corrector design

✍ Seigo Sasaki 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 646 KB

## Abstract A nonlinear controller for a power factor corrector is systematically constructed __via__ Lyapunov‐based controller design approach for the bilinear state averaged model. First, a nonlinear gain of the controller is derived to shape the source current and the output voltage be desired f

Design approach to improve linearity and

Design approach to improve linearity and power performance of microwave FETs

✍ P. Colantonio; F. Giannini; E. Limiti; A. Nanni; V. Camarchia; V. Teppati; M. Pi 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 475 KB

In this article, the minimization of asymmetry between lower and upper side band intermodulation products is discussed. Base-band and harmonics termination effects are analyzed by means of a Volterra Series approach, identifying novel conditions to minimize IMD asymmetry and IM 3 power levels. The n

The design of high-performance Doherty p

The design of high-performance Doherty power amplifier

✍ Yong-Bo Xiang; Guang-Ming Wang 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 250 KB

## Abstract The article presents a Doherty power amplifier (DPA) with both high efficiency and good linearity for GSM base station using LDMOS transistors. Prepositive delay line structure (PDL) is proposed to satisfy the performances, both higher efficiency and better linearity are achieved. The t

A method to obtain the isothermal static

A method to obtain the isothermal static DC curves of microwave FET power amplifiers

✍ G. Torregrosa-Penalva; A. Asensio-López; A. Blanco-del-Campo 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 100 KB

## Abstract This paper proposes a method to obtain the isothermal static DC curves of microwave FET power amplifiers, avoiding the use of pulsed measurements and accounting for the self‐heating problem in this type of device. The method requires the determination of the thermal resistance of the de