Geometrically non-linear vibrations of beams and plane frameworks are analyzed by the hierarchical "nite element method (HFEM). Two main points are of interest. The "rst is to compare polynomials, trigonometric functions and beam eigenfunctions as displacement shape functions for beam hierarchical "
Non-linear steady state vibration of frames by finite element method
โ Scribed by A. Y. T. Leung; T. C. Fung
- Publisher
- John Wiley and Sons
- Year
- 1989
- Tongue
- English
- Weight
- 915 KB
- Volume
- 28
- Category
- Article
- ISSN
- 0029-5981
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
The dynamic stiffness method is extended to large amplitude free and forced vibrations of frames. When the steady state vibration is concerned, the time variable is replaced by the frequency parameter in the Fourier series sense and the governing partial differential equations are replaced by a set
The hierarchical "nite-element (HFEM) and the harmonic balance methods (HBM) are used to investigate the geometrically non-linear free and steady-state forced vibrations of uniform, slender beams. The beam analogue of von KaH rmaH n's non-linear strain}displacement relationships are employed and the
This paper presents the dynamic responses of the coupled textile/rotor system by finite element analysis. When textile is wound either on or off the rotor, the system is non-conservative because mass, inertia and eccentricity of the unbalance of rotor change with time, and also the length of textile
Geometric non-linearities for large amplitude free and forced vibrations of circular plates are investigated. In-plane displacement and in-plane inertia are included in the formulation. The finite element method is used. An harmonic force matrix for non-linear forced vibration analysis is introduced