๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

NON-LINEAR VIBRATION ANALYSIS OF THE COUPLED TEXTILE/ROTOR SYSTEM BY FINITE ELEMENT METHOD

โœ Scribed by C.-G. Chien; R.-F. Fung; C.-L. Tsai


Publisher
Elsevier Science
Year
1999
Tongue
English
Weight
263 KB
Volume
221
Category
Article
ISSN
0022-460X

No coin nor oath required. For personal study only.

โœฆ Synopsis


This paper presents the dynamic responses of the coupled textile/rotor system by finite element analysis. When textile is wound either on or off the rotor, the system is non-conservative because mass, inertia and eccentricity of the unbalance of rotor change with time, and also the length of textile is time-dependent. Both the time-varying equations for textile and the whirling vibrations for rotor are derived by Hamilton's principle. It is a moving boundary problem since the unknown length of textile has to be determined as a part of the solutions. The special finite element formulations are developed by applying a complete linear polynomial approximation. The number of elements is fixed while the size of the element changes with time. The Runge-Kutta method is used to obtain numerical results. The effects of constant and non-constant angular rotating speeds, shaft stiffness and non-linear terms on the transient amplitudes of the textile and the whirling deflection of the shaft are investigated.


๐Ÿ“œ SIMILAR VOLUMES


VIBRATION ANALYSIS OF A NON-LINEAR COUPL
โœ R.-F. Fung; J.-S. Shieh ๐Ÿ“‚ Article ๐Ÿ“… 1997 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 440 KB

In this paper a dynamic formulation is presented for the coupled textile-rotor system. Both the partial differential equation for the textile thread and the ordinary differential equation for the rotor whirling vibration are derived by Hamilton's principle. When the textile is wound either on or off

NON-LINEAR VIBRATION OF BEAMS WITH INTER
โœ P. RIBEIRO; M. PETYT ๐Ÿ“‚ Article ๐Ÿ“… 1999 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 380 KB

The hierarchical "nite-element (HFEM) and the harmonic balance methods (HBM) are used to investigate the geometrically non-linear free and steady-state forced vibrations of uniform, slender beams. The beam analogue of von KaH rmaH n's non-linear strain}displacement relationships are employed and the

TORSIONAL VIBRATION ANALYSIS OF GEAR-BRA
โœ J.-S. WU; C.-H. CHEN ๐Ÿ“‚ Article ๐Ÿ“… 2001 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 286 KB

The purpose of this paper is to present a simple approach for eliminating the &&dependent'' torsional angles existing in the reduction gears of a gear-branched system so that this system may be modelled as an equivalent straight-geared (or direct-transmitted) system. Then the overall mass matrix, da

METHOD OF MULTIPLE SCALES FOR VIBRATION
โœ Z. Ji; J.W. Zu ๐Ÿ“‚ Article ๐Ÿ“… 1998 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 211 KB

The method of multiple scales is developed to analyze the free and forced vibration of non-linear rotor-bearing systems. The rotating shaft is described by the Timoshenko beam theory which considers the effect of the rotary inertia and shear deformation. A non-linear bearing pedestal model is assume