The hierarchical "nite-element (HFEM) and the harmonic balance methods (HBM) are used to investigate the geometrically non-linear free and steady-state forced vibrations of uniform, slender beams. The beam analogue of von KaH rmaH n's non-linear strain}displacement relationships are employed and the
Vibration analysis of beams with non-local foundations using the finite element method
โ Scribed by M. I. Friswell; S. Adhikari; Y. Lei
- Publisher
- John Wiley and Sons
- Year
- 2007
- Tongue
- English
- Weight
- 222 KB
- Volume
- 71
- Category
- Article
- ISSN
- 0029-5981
- DOI
- 10.1002/nme.2003
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
A new finite element model of a Timoshenko beam is developed to analyze the small amplitude, free vibrations of non-uniform beams on variable two-parameter foundations. An important characteristic of the model is that the cross-sectional area, the second moment of area, the Winkler foundation modulu
This paper presents the dynamic responses of the coupled textile/rotor system by finite element analysis. When textile is wound either on or off the rotor, the system is non-conservative because mass, inertia and eccentricity of the unbalance of rotor change with time, and also the length of textile
A "nite element analysis for a rotating cantilever beam is presented in this study. Based on a dynamic modelling method using the stretch deformation instead of the conventional axial deformation, three linear partial di!erential equations are derived from Hamilton's principle. Two of the linear di!
Three higher order refined displacement models are proposed for the free vibration analysis of sandwich and composite beam fabrications. These theories model the warping of the cross-section by taking the cubic variation of axial strain and they eliminate the need for a shear correction coefficient