WHEN IT COMES TO INDUSTRIAL IMAGE PROCESSING, ANY FAIR IS NOT GOOD ENOUGH. IT HAS TO BE THE RIGHT FAIR. Is your goal to secure a competitive edge using innovative optical technologies? Welcome to LASER World of PHOTONICS. No other exhibition brings together more innovations, applications and know-h
News Ticker: Imaging & Microscopy 3/2009
- Publisher
- Wiley (John Wiley & Sons)
- Year
- 2009
- Weight
- 230 KB
- Volume
- 11
- Category
- Article
- ISSN
- 1439-4243
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
and colleagues described the adaptation of a commercially available light emitting diode flashlight for use as a source for fluorescence excitation. This light source is long-lived, inexpensive and effective for excitation in the range of 440 -600 nm.
## News Ticker Tip-enhanced Near-field Optical Microscopy L. Eligal and coworkers described a simple method of fabricating gold tips for tip-enhanced near-field optical microscopy using a single step direct current electrochemical etch. Within a few minutes high quality gold tips with a radius of
USA, present a new device allowing to control temperature in the AFM liquid chamber within a range of 5-50 ยฐC. The device also stabilises temperature within 0.1 ยฐC and the heat generated by the cooling system is dissipated through a watercooled heat sink. The device was tested for measurements of fo
present a study of the cause of several apparent resonance peaks shown by the probe resonance curve of the atomic force microscope contains, whose origin is not well understood, and try to find the optimal imaging conditions for acoustic intermittent contact mode in fluid environment. The authors de
A presented some rough guidelines for choosing the most appropriate method of microscopy for a given biological specimen. The approach is to compare the efficiency of photon collection, the image contrast and the signal-to-noise ratio achieved by the different methods at equivalent illumination, usi