## Abstract Laser tissue soldering (LTS) is a promising technique for tissue fusion based on a heat‐denaturation process of proteins. Thermal damage of the fused tissue during the laser procedure has always been an important and challenging problem. Particularly in LTS of arterial blood vessels str
Nanoshell assisted laser soldering of vascular tissue
✍ Scribed by Daniel S. Schöni; Serge Bogni; Amadé Bregy; Amina Wirth; Andreas Raabe; Istvan Vajtai; Uwe Pieles; Michael Reinert; Martin Frenz
- Book ID
- 102465879
- Publisher
- John Wiley and Sons
- Year
- 2011
- Tongue
- English
- Weight
- 500 KB
- Volume
- 43
- Category
- Article
- ISSN
- 0196-8092
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Background and Objectives
Laser tissue soldering (LTS) is a promising technique for tissue fusion but is limited by the lack of reproducibility particularly when the amount of indocyanine green (ICG) applied as energy absorber cannot be controlled during the soldering procedure. Nanotechnology enables the control over the quantitative binding of the ICG. The aim of this study was to establish a highly reproducible and strong tissue fusion using ICG packed nanoshells. By including the chromophore in the soldering scaffold, dilution of the energy absorber during the soldering procedure is prevented. The feasibility of this novel nanoshell soldering technique was studied by assessing the local heating of the area and tensile strength of the resulting fused tissue.
Study Design/Materials and Methods
Nanoshells with a diameter of 250–270 nm were loaded with ICG and included in a porous polycaprolactone (PCL) scaffold doped with albumin solder. The nanoshell scaffold was used in a flexible, semi‐dry formulation suitable for surgical use. Heat development, tensile strength as well as tissue damage were assessed.
Results
Rabbit aortic arteries were successfully soldered using an ICG packed nanoshell scaffold. Tensile strengths of these nanoshell soldered anastomoses were found to be 734 ± 327 mN (median = 640 mN). Thermal damage was restricted to the adventitia at the irradiated area. In addition, absorber dilution was prevented during the soldering procedure resulting in significantly lower variance in maximum temperature (P = 0.03) compared to the classical liquid ICG soldering technique.
Conclusion
Using nanoshells, controlled amounts of chromophore could successfully be bound into the polymer scaffold. Diode laser soldering of vascular tissue using ICG‐nanoshell scaffolds leads to strong and reproducible tissue fusion. With optimally chosen settings of irradiation time, nanoshells coating and scaffold properties, our improved LTS procedure demonstrates the potential for a clinically applicable anastomosis technique. Lasers Surg. Med. 43:975–983, 2011. © 2011 Wiley Periodicals, Inc.
📜 SIMILAR VOLUMES
## Objective: Wound histology and mesh bioincorporation following intraperitoneal fixation using laser-assisted soldering was evaluated. ## Methods: 2.8-3.2 kg nzw rabbits underwent laparotomy. controls had 2x2 cm segments of mersilene stapled to peritoneum. group 2 segments were affixed with 55%
The ablation of atherosclerotic lesions without collateral thermal or shock wave damage is thought to be a key element for successful laser angioplasty. This study evaluated the effectiveness of pulsed ho1mium:YAG laser (2.1 pm wavelength) for this application. Fresh normal tissue (n = 139) and arte
Background/Objective: Current albumin solders for tissuewelding are soluble in physiological fluids, prior to laser irradiation. These solders are therefore subjected to mechanical alterations, which can weaken the solder-tissue repair. In this study, an albumin solder (laser activated) was develope