✦ LIBER ✦

Multiband internal antenna using two layer shorted patches for mobile handsets

✍ Scribed by Hanphil Rhyu; Jae-Hoon Jo; Frances J. Harackiewicz; Byungje Lee

Publisher: John Wiley and Sons
Year: 2006
Tongue: English
Weight: 775 KB
Volume: 49
Category: Article
ISSN: 0895-2477
DOI: 10.1002/mop.22077

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

A compact multiband internal antenna for mobile handset applications is proposed. Multiband operation is realised by two connected patches in the lower frequency band and wide band characteristics in the higher frequency band. The simulated and measured results show that the proposed antenna can effectively cover GSM, GPS, DCS, PCS, UMTS, Bluetooth/WiFi, and SDMB bands. © 2006 Wiley Periodicals, Inc. Microwave Opt Technol Lett 49: 176–179, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.22077

📜 SIMILAR VOLUMES

A shorted patch antenna with an l-shaped

A shorted patch antenna with an l-shaped ground plane for internal mobile handset antennas

✍ Fu-Ren Hsiao; Kin-Lu Wong 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 171 KB 👁 1 views

## Abstract This letter presents a novel shorted patch antenna for applications as internal mobile handset antennas. Instead of a conventional simple ground plane, the proposed antenna uses an L‐shaped ground plane, which effectively decreases the antenna's backward radiation and enhances the anten

A wideband internal antenna with shortin

A wideband internal antenna with shorting strip for mobile handset

✍ Heekyung Jung; Hoon Park; Seokjin Hong; Jaehoon Choi 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 357 KB

## Abstract In this article, a novel compact internal wideband planar inverted F‐antenna (PIFA) was designed. The proposed antenna consisted of a main patch with strip, rectangular slot, and shorting strip and occupied the total volume of 36 × 18 × 6 mm^3^. The dual band characteristic was achieved

Design of an internal antenna with wide

Design of an internal antenna with wide and multiband characteristic for mobile handset

✍ Hoon Park; Myoung il Kang; Jaehoon Choi 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 159 KB 👁 1 views

## Abstract The development of a small electrical antenna plays an important role in the rapidly growing mobile communication market. This paper presents the design of a novel small and wideband planar inverted F‐antenna that simultaneously covers the GSM900/GPS/DCS1800/DCS1900/IMT2000/WLAN/DMB ser

Penta-band internal antenna for mobile h

Penta-band internal antenna for mobile handset applications using parasitic element

✍ Ki Suk Yoon; Su Bin Park; Sung Min Kim; Woon Geun Yang 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 649 KB

## Abstract This letter presents a monopole type penta‐band internal antenna using a parasitic element. The proposed antenna, with the small size of 37 × 8 × 3.5 mm^3^ can provide sufficient bandwidth to cover the GSM(850/900), DCS, PCS, and WCDMA bands. The measured impedance bandwidth (VSWR ≤ 3)

Dual-band LTCC chip antenna design using

Dual-band LTCC chip antenna design using stacked meander patch for mobile handsets

✍ Young Do Kim; Ho-Yong Kim; Hong Min Lee 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 361 KB 👁 1 views

## Abstract This paper presents design simulation, implementation, and measurement of a miniaturized GPS/K‐PCS dual‐band LTCC chip antenna for mobile communication handsets. The dimensions of the LTCC chip antenna is 9 × 15 × 1.2 mm. The meander‐type radiating patch for dual‐band operation is reali

Design of an internal FM radio antenna f

Design of an internal FM radio antenna for mobile handsets with an arrow-shaped patch

✍ Sunho Choi; Gi-Ho Kim; Won-Mo Seong; Kyung-Sup Kwak 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 380 KB 👁 1 views

## Abstract This article describes the design, fabrication, and measurement of an internal FM radio ferrite sheet flexible antenna using an arrow‐shaped patch to enhance passive gain performance for mobile handsets.To obtain sufficient passive gain performance ≥–20 dBi, an arrow‐shaped patch is ins