✦ LIBER ✦

Morphology and mechanical properties of poly(ether-imide)-modified polycyanurates

✍ Scribed by Minghai Wang; Yingfeng Yu; Guozhu Zhan; Xiaolin Tang; Shanjun Li

Book ID: 106068621
Publisher: Springer
Year: 2006
Weight: 325 KB
Volume: 284
Category: Article
ISSN: 0340-255X
DOI: 10.1007/s00396-006-1505-8

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Phase behaviour, morphology and properti

Phase behaviour, morphology and properties of poly(ether imide)/polyarylate blends

✍ S. Bastida; J.I. Eguiazábal; J. Nazábal 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 607 KB

Phase morphology and mechanical properti

Phase morphology and mechanical properties of a poly(ether sulfone)-modified bismaleimide resin

✍ Xiao Yun Liu; Guo Zhu Zhan; Zhe Wen Han; Shan Jun Li; Ying Feng Yu 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 310 KB 👁 2 views

Mechanical and thermal properties of cer

Mechanical and thermal properties of ceramic-modified poly(amide imide)

✍ Young-Wook Park; Dong-Sung Lee 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 135 KB 👁 2 views

## Abstract Poly(amide imide)–epoxysilane (coupling agent) composites were reacted with silica, a condensation product of tetraethylorthosilicate (TEOS), by a sol–gel process and were then cast into films. After this procedure, the chemical characteristics and mechanical and thermal properties were

Poly(ether ether ketone)/poly(aryl ether

Poly(ether ether ketone)/poly(aryl ether sulfone) blends: Relationships between morphology and mechanical properties

✍ Bhanu Nandan; L. D. Kandpal; G. N. Mathur 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 953 KB

Processability, Structure and Mechanical

Processability, Structure and Mechanical Properties of Poly(ether imide)/Amorphous Copolyester Blends

✍ Ainhoa Granado; José Iqnacio Eguiazábal; Jon Nazábal 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 397 KB

## Abstract Blends of PEI with an amorphous copolyester (PCTG) were obtained by melt‐mixing followed by injection molding. The processability of PEI increased several times upon addition of just 10% PCTG, thus expanding the applications of PEI. All the blends showed a single __T__~g~ and most of th

Thermal properties of melt-blended poly(

Thermal properties of melt-blended poly(ether ether ketone) and poly(ether imide)

✍ Yong Sung Chun; Heon Sang Lee; Hyun Chul Jung; Woo Nyon Kim 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 135 KB 👁 2 views

The thermal properties of blends of poly(ether ether ketone) (PEEK) and poly(ether imide) (PEI) prepared by screw extrusion were investigated by differential scanning calorimetry. From the thermal analysis of amorphous PEEK-PEI blends which were obtained by quenching in liquid nitrogen, a single gla