𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Phase behaviour, morphology and properties of poly(ether imide)/polyarylate blends

✍ Scribed by S. Bastida; J.I. Eguiazábal; J. Nazábal

Publisher
Elsevier Science
Year
1996
Tongue
English
Weight
607 KB
Volume
37
Category
Article
ISSN
0032-3861

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Thermal properties of melt-blended poly(
Thermal properties of melt-blended poly(ether ether ketone) and poly(ether imide)
✍ Yong Sung Chun; Heon Sang Lee; Hyun Chul Jung; Woo Nyon Kim 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 135 KB 👁 2 views

The thermal properties of blends of poly(ether ether ketone) (PEEK) and poly(ether imide) (PEI) prepared by screw extrusion were investigated by differential scanning calorimetry. From the thermal analysis of amorphous PEEK-PEI blends which were obtained by quenching in liquid nitrogen, a single gla

Blends of poly(ether imide) and an aroma
Blends of poly(ether imide) and an aromatic poly(ether amide): Phase behavior and CO2 transport properties
✍ A. Etxeberria; S. Guezala; J. J. Iruin; J. G. De La Campa; J. De Abajo 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 236 KB 👁 2 views

Blends of poly(ether imide) (PEI, Ultem 1000) and an aromatic poly(ether amide) were studied. Although homogeneous or heterogeneous blends can be obtained depending on the blend preparation method, the inherent miscibility of the mixture was finally established. The so-called enthalpy relaxation met

Tensile properties of blends of poly(eth
Tensile properties of blends of poly(ether sulphone) with a poly(ether imide)
✍ Guo Qipeng; Qiu Lingwei; Ding Mengxian; Feng Zhiliu 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 264 KB

Al~traet--Blends of poly(ether sulpbone) (PES) with a poly(ether imide) (PEI) in various proportions were prepared by the coprecipitation method. Mechanical properties and morphology of the blends were studied using tensile tests and scanning electron microscopy (SEM). The tensile moduli exhibit pos

Tensile properties of blends of phenolph
Tensile properties of blends of phenolphthalein poly(ether ether ketone) with a poly(ether imide)
✍ Guo Qipeng; Qiu Lingwei; Ding Mengxian; Feng Zhiliu 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 232 KB

Blends of phenolphthalein poly(ether ether ketone) (PEK-C) with a poly(ether imide) (PEI) in various proportions were prepared by the coprecipitation method. Mechanical properties and morphology of the blends were studied using tensile tests and scanning electron microscopy (SEM). It was found that