✦ LIBER ✦

Monitoring of cure kinetic prepreg and cure cycle modeling

✍ Scribed by M. L. Costa; E. C. Botelho; M. C. Rezende

Book ID: 106392773
Publisher: Springer
Year: 2006
Tongue: English
Weight: 264 KB
Volume: 41
Category: Article
ISSN: 0022-2461
DOI: 10.1007/s10853-006-6082-1

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Microdielectric monitoring of prepreg cu

Microdielectric monitoring of prepreg cure

✍ Walter X. Zukas; Stanley E. Wentworth 📂 Article 📅 1987 🏛 Society for Plastic Engineers 🌐 English ⚖ 497 KB

Kinetics analysis of the curing reaction

Kinetics analysis of the curing reaction of fast cure epoxy prepregs

✍ L. F. Yang; K. D. Yao; W. Koh 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 219 KB 👁 2 views

In this article, the curing kinetics of two fast cure flip-chip epoxy encapsulants under both isothermal and nonisothermal conditions are investigated by differential scanning calorimetry. The method allows determination of the most suitable kinetic model and corresponding parameters. The kinetic an

Cure modeling and monitoring of epoxy/am

Cure modeling and monitoring of epoxy/amine resin systems. I. Cure kinetics modeling

✍ Panagiotis I. Karkanas; Ivana K. Partridge 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 276 KB 👁 2 views

The cure kinetics of four epoxy/amine systems including commercial RTM6 and F934 resins have been investigated under both isothermal and dynamic curing conditions. Differential Scanning Calorimetry (DSC) was the thermoanalytical technique used to determine the cure kinetics of these resin systems. T

Cure processing modeling and cure cycle

Cure processing modeling and cure cycle simulation of epoxy-terminated poly(phenylene ether ketone). IV. Cure cycle simulation

✍ Qiang Wang; Tianbai He; Ping Xia; Tianlu Chen; Baotong Huang 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 216 KB 👁 2 views

Epoxy-terminated poly(phenylene ether ketone) (E-PEK) developed in this Institute is a candidate matrix resin for polymer composites as structural materials. Cure cycles for this reaction system were simulated according to the previously established processing model. It is found that for the E-PEK s

Dynamic modeling of curing process of ep

Dynamic modeling of curing process of epoxy prepreg

✍ Liangfeng Sun; Su-Seng Pang; Arthur M. Sterling; Ioan I. Negulescu; Michael A. S 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 296 KB 👁 2 views

Consistent model predictions for isother

Consistent model predictions for isothermal cure kinetics investigation of high performance epoxy prepregs

✍ Jin Zhang; Bronwyn Fox; Qipeng Guo 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 551 KB

## Abstract An accurate kinetics model is essential for understanding the curing mechanism and predicting the end properties of polymer materials. Graphite/epoxy AS4/8552 prepreg is a recent high‐performance thermosetting composite modified with thermoplastic, which is being used in the manufacture