## Abstract A dual‐mode bandpass filter (BPF) using the degenerate modes of a meander square‐ring structure printed on the high‐permittivity substrate is proposed. The dual‐mode resonator is based on a square‐ring loaded with two meander strips at the coupling sides. The filter is printed on the Al
Miniaturized dual-mode patch filter using slotted square resonator and meander spurline
✍ Scribed by Xiaohua Li; Haiwen Liu
- Book ID
- 102950196
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 554 KB
- Volume
- 50
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A compact dual‐mode patch filter was designed and examined. Five pairs of slots and a pair of meander spurlines were applied to redirect the current flow on patch resonator, thus the resonance frequencies of the filter are reduced. Moreover, a computer‐aid design (CAD) method using radius base function neural network (RBFNN) is proposed to optimize this new filter. Measurements are given to verify this design and methodology. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 3059–3062, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23897
📜 SIMILAR VOLUMES
## Abstract A compact dual‐mode bandpass filter (BPF) using equilateral triangular slotted‐patch resonator is proposed, which has the advantages of compact size, low insertion loss, and good passband selectivity because of two transmission zeros located at the low and high stopband. A demonstration
## Abstract This article presents a novel miniaturized bandpass filter using a square ring. Each side of the ring is loaded almost at one of the ends with a stub. The stub increases the current path length; bring down the resonance frequency of the ring. The other end of each stub is terminated wit