## Abstract A generic lumped‐element circuit of dual‐band bandstop filter (DBBSF) is proposed based on novel composite shunt resonators, and its design method is developed with closed‐form formulas. As an example, a DBBSF with center frequencies of 1.7 and 2.3 GHz is designed and fabricated using m
Microstrip dual-band bandpass and bandstop filters
✍ Scribed by Subash Vegesna; Mohammad Saed
- Publisher
- John Wiley and Sons
- Year
- 2011
- Tongue
- English
- Weight
- 354 KB
- Volume
- 54
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
In this letter, simple and effective design of dual‐band bandpass and bandstop filters using microstrip open‐loop resonators is proposed.The dual‐band bandpass and bandstop filters developed in this letter exhibit dual operating frequencies that are not integral multiples of each other and are realized using a simple method rather than using the extensive method of extracting coupling coefficient matrix for designing dual‐band filters. Parametric analysis is performed on the proposed microstrip structures to determine the optimum dimensions of the dual‐band filters. Both simulation and measured results are presented in this letter, and good agreement is obtained between the results. © 2011 Wiley Periodicals, Inc. Microwave Opt Technol Lett 54:168–171, 2012; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.26469
📜 SIMILAR VOLUMES
## Abstract A miniaturized microstrip dual‐mode dual‐band bandpass filter is presented in this article. The filter is constructed by two slow‐wave dual‐mode resonators and two feed lines. To excite dual‐mode response, each dual‐mode resonator is coupled by an L‐shape feed line. To realize multiple
## Abstract A compact nonresonating, dual‐band bandstop filter is proposed. By connecting two transmission lines with proper characteristic impedances and phase delay (one is 90° and the other one is 450° in electrical length at center frequency), a dual stopband with two transmission zeros at each
## Abstract A dual‐band microstrip bandpass filter with controllable bandwidth is proposed by using new dual‐band resonators. The resonator consists of a pair of shunt open stubs, including a stepped‐impedance open stub. The open stubs produce three transmission zeros, which result in sharp attenua
## Abstract A novel dual‐mode dual‐band bandpass filter using nested meander‐loop resonators is proposed in this article. The new filter structure is small and convenient to change the higher passband frequency. Several finite attenuation poles in stopbands are realized to improve the selectivity o
## Abstract A novel compact and simple microstrip trapezium loop bandpass filter structure using only one resonator is developed in this letter, the inequilaterally structure perturbs the fields of the resonator and excite degenerate modes.Without coupling gaps, the new filter can reduce uncertaint