## Abstract A miniaturized microstrip dual‐mode dual‐band bandpass filter is presented in this article. The filter is constructed by two slow‐wave dual‐mode resonators and two feed lines. To excite dual‐mode response, each dual‐mode resonator is coupled by an L‐shape feed line. To realize multiple
A new design method of microstrip dual-band bandstop filters
✍ Scribed by Katsunori Kikuchi; Zhewang Ma; Tetsuo Anada
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 342 KB
- Volume
- 50
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A generic lumped‐element circuit of dual‐band bandstop filter (DBBSF) is proposed based on novel composite shunt resonators, and its design method is developed with closed‐form formulas. As an example, a DBBSF with center frequencies of 1.7 and 2.3 GHz is designed and fabricated using microstrip lines. The measured frequency response agrees excellently with the theoretical predictions, validating well the proposed design theory and filter structure. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 2888–2892, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23822
📜 SIMILAR VOLUMES
## Abstract A novel bandstop filter (BSF), with a stop band covering GSM‐900, GSM1800, Bluetooth, and future 5 GHz applications which possesses the characteristics of compact size and wide bandwidth is proposed and fabricated. Parameters are optimized via numerical simulations. The simulations are
## Abstract A novel dual‐band microstrip bandpass filter with multiple transmission zeros has been proposed in this article. Dual‐band resonators composed of one shunt short‐circuited stub and one shunt open‐circuited stub are connected by dual‐band admittance inverters (J‐inverters) to create dual
## Abstract A dual‐band microstrip bandpass filter with controllable bandwidth is proposed by using new dual‐band resonators. The resonator consists of a pair of shunt open stubs, including a stepped‐impedance open stub. The open stubs produce three transmission zeros, which result in sharp attenua
## Abstract In this article, a novel type of dual‐band bandpass filter (DBBPF) is proposed by using microstrip composite resonators, and its design method is developed based on the lumped‐element equivalent circuit of the filter. Both the midband frequencies and the passband widths of the dual band
## Abstract A dual‐band microstrip bandpass filter is proposed. With the assistance of modified short‐circuit quarter‐wavelength resonators, the dual‐band bandpass filter can be developed. Theoretical analysis and design procedures are provided; the prototypical bandpass filter with dual passbands