𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Design of a microstrip dual-band filter with modified short-circuit quarter-wavelength resonators

✍ Scribed by Ching-Wen Tang; Che-Wei Shen

Publisher
John Wiley and Sons
Year
2010
Tongue
English
Weight
314 KB
Volume
52
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

A dual‐band microstrip bandpass filter is proposed. With the assistance of modified short‐circuit quarter‐wavelength resonators, the dual‐band bandpass filter can be developed. Theoretical analysis and design procedures are provided; the prototypical bandpass filter with dual passbands is fabricated and measured as well. Well‐matched simulated results and experimental data validate the proposed filter. © 2009 Wiley Periodicals, Inc. Microwave Opt Technol Lett 52: 236–239, 2010; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.24889

📜 SIMILAR VOLUMES

Modified short-circuit quarter-wavelengt
Modified short-circuit quarter-wavelength resonators for the design of microstrip dual-passband bandpass filter
✍ Ching-Wen Tang; Huan-Chang Hsu 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 259 KB

## Abstract In this article, a novel microstrip dual‐passband bandpass filter has been proposed and developed. This filter is composed of two modified short‐circuit quarter‐wavelength resonators with a half‐wavelength stepped‐impedance resonator. Design procedures and theoretical analysis are provi

Compact dual-band bandpass filter using
Compact dual-band bandpass filter using meander short-circuit quarter-wavelength resonators
✍ H. W. Liu; Z. C. Zhang; G. W. Wei; L. Shen; X. H. Guan 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 304 KB

## Abstract In this letter, a compact dual‐band microstrip bandpass filter (BPF) with independently controlled center frequencies is designed using meander short‐circuit quarter‐wavelength resonators. Its coupling scheme and equivalent circuit model are analyzed. A good agreement between simulation

Design of dual-band bandpass filter usin
Design of dual-band bandpass filter using diverse quarter-wavelength resonators for GPS/WLAN applications
✍ Hung-Wei Wu; Yan-Kuin Su; Min-Hang Weng; Ru-Yuan Yang 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 318 KB

## Abstract The novel compact dual‐band bandpass filter (BPF) by using diverse quarter‐wavelength (λ/4) resonators for global position system (GPS)/wireless local area network (WLAN) applications is proposed for the first time. The use of two interdigital‐like λ/4 resonators of the proposed BPF eff

Design of compact microstrip dual-band b
Design of compact microstrip dual-band bandpass filters with λ/4 stepped-impedance resonators
✍ He-Kai Jhuang; Ching-Her Lee; Chung-I. G. Hsu 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 286 KB

## Abstract This article presents a compact microstrip bandpass filter (BPF) design for the 2.45 and 5.25 GHz wireless local‐area network (WLAN) applications. U‐shaped quarter‐wavelength stepped‐impedance resonators (λ/4 SIRs), for which the circuit size is small and the second resonant frequency c

Design of a new dual-band microstrip ban
Design of a new dual-band microstrip bandpass filter with multiple transmission zeros
✍ Lin Li; Zheng-Fan Li 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 186 KB

## Abstract A novel dual‐band microstrip bandpass filter with multiple transmission zeros has been proposed in this article. Dual‐band resonators composed of one shunt short‐circuited stub and one shunt open‐circuited stub are connected by dual‐band admittance inverters (J‐inverters) to create dual

Design of a dual-band π-shaped microstri
Design of a dual-band π-shaped microstrip patch antenna with a shorting pin for 5.2/5.8 GHz WLAN systems
✍ Sun-Ho Choi; Daehan Kwak; Hwa-Choon Lee; Kyung-Sup Kwak 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 173 KB

## Abstract This article describes the design, fabrication, and measurement of a novel π‐shaped dual‐band antenna with a shorting pin for 5.2/5.8 GHz wireless local area network (WLAN) systems.To obtain sufficient bandwidth when return loss (RL) < −10 dB, a shorting pin is inserted in the patch and