𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Micromechanisms and toughness for cleavage fracture of steel

✍ Scribed by A.R. Rosenfield; B.S. Majumdar

Publisher
Elsevier Science
Year
1987
Tongue
English
Weight
851 KB
Volume
105
Category
Article
ISSN
0029-5493

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Sequences of fracture toughness micromec
Sequences of fracture toughness micromechanisms in PP/CaCO3 nanocomposites
✍ R. Lesan Khosh; R. Bagheri; S. Zokaei πŸ“‚ Article πŸ“… 2008 πŸ› John Wiley and Sons 🌐 English βš– 689 KB

## Abstract Mechanical properties and fracture toughness micromechanisms of copolypropylene filled with different amount of nanometric CaCO~3~ (5–15 wt %) were studied. __J__‐integral fracture toughness was incorporated to measure the effect of incorporation of nanoparticle into PP matrix. Crack‐ti

Fracture toughness of laminated steels
Fracture toughness of laminated steels
✍ N.G. Ohlson πŸ“‚ Article πŸ“… 1974 πŸ› Elsevier Science 🌐 English βš– 929 KB

Lamination occurs spontaneously in the transverse direction in many commercially available steel plates, if the transverse stresses are sufficiently high. Previous investigations have indicated that lamination is often accompanied by an improvement in the fracture toughness of the plate material. In

Master curve for brittle cleavage fractu
Master curve for brittle cleavage fracture toughness testing
✍ M. Lambrigger πŸ“‚ Article πŸ“… 1996 πŸ› Elsevier Science 🌐 English βš– 108 KB

The scatter distribution of the fracture toughness of macroscopically homogeneous, brittle materials is usually described by a cumulative failure probability distribution function, which is dependent on the material, the specimen-size and the testing-temperature. In this work, a master curve is deri