✦ LIBER ✦

Method for monitoring sliding conditions of a piston ring

Publisher: Elsevier Science
Year: 2010
Tongue: English
Weight: 203 KB
Volume: 2010
Category: Article
ISSN: 1350-4789
DOI: 10.1016/s1350-4789(10)70210-5

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Method for stabilising a piston ring

📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 190 KB

A series of alternative designs for the attachment of the seal housing to a large slurry pump is covered by this patent. The purpose is to improve pump efficiency and maintenance, and overcome problems associated with lifting into place replacement seal housings. The housing can be adjustable and he

Method for manufacturing a piston ring

📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 88 KB

Method and device for mounting piston ri

Method and device for mounting piston ring on a piston

📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 204 KB

forced axially into assembly with the seal component to permit the end of the flange to pass by. The retention lip then returns to shape to capture the flange and thereby support the components against disassembly in the reverse direction.

Method of coating a piston ring

📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 131 KB

ary seal assembly. This enables the mechanical seal to be fitted to equipment where the shaft is out of alignment with the equipment casing. This ability to accommodate angular variation can be achieved without any consequential misalignment of the sealing faces of the seal.

Method of coating a piston ring or cylin

Method of coating a piston ring or cylinder liner

📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 160 KB

A study on variation in oil film thickne

A study on variation in oil film thickness of a piston ring package: variation of oil film thickness in piston sliding direction

✍ Takamitsu Seki; Kei Nakayama; Takayuki Yamada; Akira Yoshida; Masaaki Takiguchi 📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 895 KB

This paper describes the variation in oil "lm thickness (OFT) of a piston-ring package measured with LIF on the piston thrust side in the sliding direction. It is found that the oil control ring OFT di!ers signi"cantly from the theoretical value in the early stage of the down stroke. It is also foun