✦ LIBER ✦

Mechanical properties and apatite-forming ability of PMMA bone cements

✍ Scribed by D. Rentería-Zamarrón; D.A. Cortés-Hernández; L. Bretado-Aragón; W. Ortega-Lara

Publisher: Elsevier Science
Year: 2009
Weight: 710 KB
Volume: 30
Category: Article
ISSN: 0261-3069
DOI: 10.1016/j.matdes.2008.11.024

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Corrigendum to “Mechanical properties an

Corrigendum to “Mechanical properties and apatite-forming ability of PMMA bone cements” [Materials and Design 30 (2009) 3318–3324]

✍ D. Rentería-Zamarrón; D.A. Cortés-Hernández; L. Bretado-Aragón; W. Ortega-Lara 📂 Article 📅 2010 🏛 Elsevier Science ⚖ 258 KB

Bone-like apatite-forming ability and me

Bone-like apatite-forming ability and mechanical properties of poly(ε-caprolactone)/silica hybrid as a function of poly(ε-caprolactone) content

✍ Sang-Hoon Rhee 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 640 KB

Mechanical properties of poly(methyl met

Mechanical properties of poly(methyl methacrylate) bone cements

✍ Robinson, R. P. ;Wright, T. M. ;Burstein, A. H. 📂 Article 📅 1981 🏛 John Wiley and Sons 🌐 English ⚖ 342 KB

## Abstract Samples of low viscosity poly(methyl methacrylate) (PMMA), graphite reinforced PMMA, and graphite reinforced low viscosity PMMA were evaluated for their compression strength and fracture toughness. These results were compared with two currently used plain PMMA bone cements. There were n

Mechanical properties of acrylic bone ce

Mechanical properties of acrylic bone cement containing PMMA-SiO2 hybrid sol-gel material

✍ Yang, Jen-Ming ;Lu, Charng-Shing ;Hsu, Ying-Gev ;Shih, Chun-Hsiung 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 206 KB 👁 3 views

An organic-inorganic hybrid material, poly(methyl methacrylate) (PMMA)-SiO 2 (SiO 2 content of 72 wt%), was prepared by incorporating PMMA structure units covalently into an SiO 2 glass network via the sol-gel approach. The hybrid sol-gel material PMMA-SiO 2 was subsequently used as the solid powder

Film-forming ability and mechanical prop

Film-forming ability and mechanical properties of coalesced latex blends

✍ S. Lepizzera; C. Lhommeau; G. Dilger; T. Pith; M. Lambla 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 214 KB 👁 2 views

The film-forming ability of latex blends (hard latex / soft latex) and the mechanical behavior at finite strain of latex blend films (soft matrix with tough inclusions) has been investigated. The maximum weight fraction of hard latex particles (f max ) which still gives rise to transparent and crack

NMP-modified PMMA bone cement with adapt

NMP-modified PMMA bone cement with adapted mechanical and hardening properties for the use in cancellous bone augmentation

✍ Andreas Boger; Kurtis Wheeler; Andrea Montali; Elliot Gruskin 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 152 KB

## Abstract The use of polymethylmethacrylate (PMMA) to reinforce vertebral bodies (Vertebroplasty) leads to an increase in the Young's modulus of the augmented vertebral body. Fractures in the adjacent vertebrae may be the consequence thereof. Hence, PMMA with a reduced Young's modulus may be suit