✦ LIBER ✦

Mechanical alloying of Cu–xCr (x = 3, 5 and 8 wt.%) alloys

✍ Scribed by C. Aguilar; S. Ordoñez; D. Guzman; P.A. Rojas

Book ID: 116606874
Publisher: Elsevier Science
Year: 2010
Tongue: English
Weight: 643 KB
Volume: 504
Category: Article
ISSN: 0925-8388
DOI: 10.1016/j.jallcom.2010.05.061

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Hydrogen storage characteristics of comp

Hydrogen storage characteristics of composite TiCr1.8 + X wt.% LaNi5 alloys

✍ Taizhong Huang; Zhu Wu; Guoxin Sun; Naixin Xu 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 133 KB

Precipitation kinetics in Ag–2 wt%

Precipitation kinetics in Ag–2 wt% Cu and Ag–2 wt% Cu–0.5 wt% In alloys during transformation

✍ R.H. Nada 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 284 KB

The effect of quenching rate on the stress-strain characteristics of Ag-2 wt% Cu and Ag-2 wt% Cu-0.5 wt% In alloys was investigated in the temperature range from 723 K to 923 K. The work-hardening parameters s y , s f , and w, were found to decrease with increasing aging temperature exhibiting maxim

Microstructure and mechanical properties

Microstructure and mechanical properties of spray co-deposited Al–8.9 wt.% Si–3.2 wt.% Cu–0.9 wt.% Fe + (Al–3 wt.% Mn–4 wt.% Si)p composite

✍ L.A. Bereta; C.F. Ferrarini; W.J. Botta F; C.S. Kiminami; C. Bolfarini 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 646 KB

Hydrogen absorption–desorption character

Hydrogen absorption–desorption characteristics of Ti(0.22 + X)Cr(0.28 + 1.5X)V(0.5 − 2.5X) (0 ≤ X ≤ 0.12) alloys

✍ Sung-Wook Cho; Choong-Nyeon Park; Jeong-Hyun Yoo; Jeon Choi; Je-Shin Park; Chang 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 617 KB

Structure, thermal stability and magneto

Structure, thermal stability and magnetostrictive properties of PrFex (1.5 ≤ x ≤ 3.0) alloys

✍ Y.G. Shi; S.L. Tang; Y.J. Huang; B. Nie; B. Qian; L.Y. Lv; Y.W. Du 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 447 KB

Microstructural characteristics and mech

Microstructural characteristics and mechanical properties of Al–2.5 wt.% Li–1.2 wt.% Cu–xMg alloys

✍ Jeong-Min Kim; Ki-Dug Seong; Joong-Hwan Jun; Keesam Shin; Ki-Tae Kim; Woon-Jae J 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 521 KB

Mechanical alloying of Cu–xCr (x&#xa0;=&#xa0;3, 5 and 8&#xa0;wt.%) alloys

Mechanical alloying of Cu–xCr (x = 3, 5 and 8 wt.%) alloys