𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Measurement of system parameters using calibrated rf-noise sources

✍ Scribed by Yu. N. Seryakov; R. I. Shabanov

Publisher
Springer US
Year
1986
Tongue
English
Weight
163 KB
Volume
29
Category
Article
ISSN
0543-1972

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

An automated measurement system for char
An automated measurement system for characterization of RF and gradient coil parameters
✍ Jeffrey S. Boyer; Steven M. Wright; Jay R. Porter πŸ“‚ Article πŸ“… 1998 πŸ› John Wiley and Sons 🌐 English βš– 816 KB

## Abstract A fully automated laboratory‐based measurement system for characterization of coil system parameters is presented. This method uses an inexpensive personal computer (PC)‐controlled stepper motor positioning system in conjunction with a network/spectrum analyzer and an analog‐to‐digital

Direct noise characterization of microwa
Direct noise characterization of microwave FET using 50Ξ© noise figure and Y-parameter measurements
✍ Marco De Dominicis; Franco Giannini; Ernesto Limiti; Antonio Serino πŸ“‚ Article πŸ“… 2005 πŸ› John Wiley and Sons 🌐 English βš– 113 KB

## Abstract A fast and accurate method to determine the noise parameters of microwave FETs, based on a new expression of the device noise figure as a function of the __Y__‐parameters and two equivalent noise temperatures, is presented. The method requires only the measured small‐signal parameters a

Measurement of mechanical parameters in
Measurement of mechanical parameters in two-mass resonant system using disturbance observer
✍ Makoto Iwasaki; Terukazu Hiroe; Nobuyuki Matsui πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 989 KB

SUMMARY In application fields for two-mass resonant system, control theory-based various techniques that use feedforward/feedback control have been proposed to achieve high performance motion control. Although these schemes effectively suppress resonant vibration, they are quite sensitive to system