The design of a narrowband MIC filter using the high-Q lumped resonators is presented. The unloaded Q-factor of the lumped resonator estimated by theory and experiment is about 150 at 2.44 GHz. A two-section bandpass filter prototype is designed and tested. This filter demonstrates a maximum inserti
Meaning of resonator's coupling coefficient in bandpass filter design
✍ Scribed by Ikuo Awai
- Book ID
- 102160110
- Publisher
- John Wiley and Sons
- Year
- 2006
- Tongue
- English
- Weight
- 347 KB
- Volume
- 89
- Category
- Article
- ISSN
- 8756-663X
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract In this article, a novel multilayer second‐order coupled‐resonator bandpass filter with harmonics suppression is proposed to improve the stopband characteristics. The proposed filter has been implemented in a five‐layer configuration using multilayer PCB technology. The measured results
## Abstract In this letter, a multilayered dual‐band bandpass filter (BPF) using cross‐coupled stepped impedance resonators (SIRs) is designed and implemented. By determining the impedance ratio (K) and physical length (α) of the SIRs, the dual‐band response at 2.4/5.2 GHz can be achieved. Cross‐co
## Abstract This article deals with the design of dual‐mode ring resonator fed by quarter wavelength coupled‐lines and its applications for bandpass filters. A specific synthesis was developed for ring‐based resonator which made ease the design of further bandpass filters. Three compact bandpass fi