BSCCO-2223 tapes have been produced by the 'powder-in-tube' method with reproducible critical current densities of > 1 x 104 A cm-2 at 77 K and 5 x 104 A cm-2 at 4.2 K. Superconductivity at 77 K was retained in fields of up to 7 T. The influence of mechanical treatments (e.g. drawing, rolling and pr
Magnetic Measurements of Critical Currents in Ag-BPSCCO Tapes: A Comparison
✍ Scribed by Lascialfari, A. ;Baldini, A. ;De Gennaro, S. ;Garrè, R. ;Peruzzi, A. ;Sangregorio, C.
- Publisher
- John Wiley and Sons
- Year
- 1997
- Tongue
- English
- Weight
- 198 KB
- Volume
- 161
- Category
- Article
- ISSN
- 0031-8965
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
To test samples of superconductor tape destined for use in power transmission cables, it is necessary to simulate the actual operating conditions for these cables A transformer in which the field parallel to one side of the superconductor sample is provided by cylindrical iron poles, produces these
The critical currents of high quality sintered YBCO tubes are measured in two configurations, namely (a) the self-field generated by the transport current is superimposed by an applied circular magnetic field generated by a current through a central wire, and (b) the self-field is superimposed by an
Cryostatic stabilization is appropriate for superconducting magnets producing steady fields over large volumes The measured recovery currents for a 10 cm bore 6.4 T experimental solenoid are compared with values derived from a stability analysis which includes heat flow from the resistive region to
## Abstract Since the recent failure events of two particular series of zirconia femoral heads for total hip replacement prosthesis, a large decrease in the use of zirconia ceramics for orthopaedic implants has been observed. In spite of the biomedical success of this material during the last 10 ye