𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Low-profile broadband printed VHF monopole antenna for vehicular applications

✍ Scribed by Saou-Wen Su; Yung-Tao Liu; Kin-Lu Wong; Chia-Lun Tang

Publisher
John Wiley and Sons
Year
2004
Tongue
English
Weight
72 KB
Volume
42
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

A novel low‐profile broadband printed monopole antenna suitable for VHF operations on vehicles is presented. The proposed monopole antenna is printed on a flexible printed circuit board and then folded onto a cylindrical foam base. A constructed prototype suitable for operation in the 200‐MHz band is demonstrated. The prototype has a low profile of about 11 cm only (about 7% of the wavelength at 200 MHz) and shows a wide bandwidth (2.5:1 VSWR) of larger than 20%. © 2004 Wiley Periodicals, Inc. Microwave Opt Technol Lett 42: 349–350, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.20301

📜 SIMILAR VOLUMES

Broadband low-profile printed T-shaped m
Broadband low-profile printed T-shaped monopole antenna for 5-GHz wlan operation
✍ Saou-Wen Su; Kin-Lu Wong; Hong-Twu Chen 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 99 KB

## Abstract A broadband low‐profile printed T‐shaped monopole antenna is presented. It is demonstrated that, by short‐circuiting the central arm of a low‐profile T‐shaped monopole to the ground plane, much improved impedance matching over a wide frequency range can be achieved. A constructed protot

Low-profile broadband printed quadrifila
Low-profile broadband printed quadrifilar helical antenna for broadcasting satellite application
✍ Yen-Yu Chen; Kin-Lu Wong 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 128 KB

## Abstract This paper presents a low‐profile broadband design of a printed quadrifilar helical antenna for the application as a broadcasting satellite receiving antenna in the frequency range of about 2.3 to 2.7 GHz. The antenna comprises four parallel printed strips excited in phase quadrature an

Broadband low-profile cylindrical monopo
Broadband low-profile cylindrical monopole antenna for 1800 MHz operation
✍ Jeng-Wen Lai; Chia-Luan Tang; Shyh-Tirng Fang; Kin-Lu Wong 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 174 KB

## Abstract A broadband low‐profile cylindrical monopole antenna, top‐loaded with a shorted circular patch, is presented. For 1800‐MHz operation, the antenna shows a low profile of only 11 mm, corresponding to about 6.6% of the wavelength at 1800 MHz. In addition, the antenna has a wide bandwidth (

New broadband dual-printed inverted L-sh
New broadband dual-printed inverted L-shaped monopole antenna for tri-band wireless applications
✍ Qinjiang Rao; Tayeb A. Denidni 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 312 KB 👁 1 views

## Abstract A broadband printed monopole antenna is proposed for digital communication systems (DCS‐1800), personal communication services (PCS1900), and international mobile telecommunication (IMT‐2000) tri‐band mobile devices. The proposed antenna is composed of two inverted L‐shaped monopoles, a

Internal low-profile metal-plate monopol
Internal low-profile metal-plate monopole antenna for DTV portable multimedia player applications
✍ Yeon-Sik Yu; Seung-Gil Jeon; Hoon Park; Dong-Hyun Seo; Jae-Hoon Choi 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 364 KB

## Abstract A low‐profile metal‐plate monopole antenna for mobile handset operating over Digital‐TV (DTV; 470–850 MHz) frequency band is proposed. The antenna consists of a folded rectangular patch and two slits, and has a small volume of 65 × 25 × 5 mm^3^. The measured return loss for the proposed

A very-low-profile broadband planar ante
A very-low-profile broadband planar antenna for DCS-1800 and IMT-2000 applications
✍ R. L. Li; B. Pan; J. Laskar; M. M. Tentzeris 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 443 KB

## Abstract A very‐low‐profile (VLP) broadband planar antenna is developed for DCS‐1800 and IMT‐2000 handsets. The VLP planar antenna consists of an S‐strip and a T‐strip, which are separately printed on the two sides of a thin substrate. The antenna height is only 4.8 mm which is much lower than p