𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Loaded frequency selective surface

✍ Scribed by Qiang Gao; Dun-Bao Yan; Yun-Qi Fu; Nai-Chang Yuan

Publisher
John Wiley and Sons
Year
2005
Tongue
English
Weight
93 KB
Volume
47
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

In this paper a new frequency‐selective surface (FSS) with loadings, is introduced and analyzed using period moments methods. The simulated results show that FSS may operate in different bands and especially generate a large reduction in the resonant frequency for a fixed unit‐cell size through different loadings. This provides a new orientation for FSS development. Practical circuits are fabricated, and the measured results basically agree well with the simulated ones. © 2005 Wiley Periodicals, Inc. Microwave Opt Technol Lett 47: 47–49, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.21077

📜 SIMILAR VOLUMES

Loaded frequency selective surfaces usin
Loaded frequency selective surfaces using substrate integrated waveguide technology
✍ Rong-Rong Xu; Zhi-Yuan Zong; Guo Yang; Wen Wu 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 423 KB

## Abstract In this article, a novel miniaturized frequency selective surface (FSS) is presented, in which each periodic cell consists of a ring slot resonator loaded with four ceramic chip capacitors for reducing the cell size. To eliminate the undesired coupling between unit cells, the unit cell

A new microstrip frequency-selective sur
A new microstrip frequency-selective surface
✍ P. P. Sarkar; R. Bhattacharjee; S. Das; S. Sarkar; S. K. Chowdhury 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 94 KB

## Abstract The frequency‐selective property of a concentric ring microstrip patch with a circular patch at its center has been investigated experimentally. Measured data indicate a 16 dB dip in the normalized transmitted electric field versus frequency plotted at a particular frequency. © 2001 Joh

Single-layer bandpass active frequency s
Single-layer bandpass active frequency selective surface
✍ Ghaffer I. Kiani; Kenneth L. Ford; Karu P. Esselle; Andrew R. Weily; C. Panagamu 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 326 KB

## Abstract A single‐layer, bandpass, active FSS is presented. It shows good angle of incidence stability for TE incidence, at the operating frequency of 2.45 GHz. It is based on circular loop aperture with each unit cell having four PIN diodes. A novel method for dc biasing is used. About 12 dB av

A simple dual-band frequency selective s
A simple dual-band frequency selective surface
✍ L. M. Araújo; R. H. C. Maniçoba; A. L. P. S. Campos; A. G. d'Assunção 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 166 KB

## Abstract Design and experimental investigations are presented for a dual‐band frequency selective surface (FSS) with perfectly conducting rectangular patch elements. The work was developed in two steps. In the first step, two single‐band FSS screens were designed to obtain resonant frequencies a

A novel miniaturized frequency selective
A novel miniaturized frequency selective surface with excellent center frequency stability
✍ Hong-Yu Yang; Shu-Xi Gong; Peng-Fei Zhang; Feng-Tao Zha; Jin Ling 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 355 KB

## Abstract A novel miniaturized frequency selective surface is proposed. The size reduction is achieved by bending the edge of square loop aperture into the inner space to lengthen the resonant length. Compared with conventional square loop aperture frequency selective surface (FSS), the area of t

Frequency-selective loading for a transm
Frequency-selective loading for a transmitting active integrated antenna
✍ V. B. Ertürk; R. G. Rojas; P. Roblin 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 167 KB

## Abstract A simple frequency‐selective load in the form of a compensating network is attached to an oscillator‐type transmitting active integrated antenna (AIA) to suppress undesired low‐frequency oscillations and to improve the robustness of the oscillator. Although the input impedance of the ac