𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Lead as a model material in the investigation of shear-type metal flows

✍ Scribed by J.H. Mohamed; T.Z. Blazynski

Publisher
Elsevier Science
Year
1987
Weight
417 KB
Volume
15
Category
Article
ISSN
0378-3804

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Investigation of flow and material induc
Investigation of flow and material induced hemolysis with a Couette type high shear system
✍ S. Klaus; R. Paul; H. Reul; K. Mottaghy; B. Glasmacher πŸ“‚ Article πŸ“… 2001 πŸ› John Wiley and Sons 🌐 English βš– 160 KB

Damage of red blood cells (hemolysis) in miniaturized pump systems for heart support is induced by contact with artificial surfaces and high mechanical shear forces. In vitro experiments with porcine blood under well defined material and flow conditions with a new Couette model showed hemolysis not

Flow investigation of phase change mater
Flow investigation of phase change material (PCM) slurry as a heat transfer fluid in a closed loop system
✍ L. Royon; D. Jacquier; P. Mercier πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 232 KB

Aqueous phase change material (PCM) particles are dispersed in an organic phase to constitute a slurry for using as a cold heat transfer medium for district cooling in refrigeration and air conditioning industry. The PCM contains 90% of water stabilized by a three-dimensional network of polymer. The

Finite element modelling of sheared flow
Finite element modelling of sheared flow effects on the radiation characteristics of acoustic sources in a circular duct
✍ James E. Steck; Walter Eversman πŸ“‚ Article πŸ“… 1993 πŸ› John Wiley and Sons 🌐 English βš– 977 KB

The recent interest in propeller noise generation, stimulated by development of new propeller types for commercial propjets, has generated a need for the ability to measure the noise characteristics of propellers. However, wind tunnel noise measurements are affected by reflections from the wind tunn