𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Large-signal optically controlled HEMT model and oscillator design

✍ Scribed by Zhang, G.; Pollard, R.D.; Snowden, C.M.

Book ID
114454777
Publisher
The Institution of Electrical Engineers
Year
1996
Tongue
English
Weight
434 KB
Volume
143
Category
Article
ISSN
1350-2417

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

A new instantaneous model of MESFET and
A new instantaneous model of MESFET and HEMT devices for large-signal circuit design
✍ Maurizio Cicolani; Alberto Di Martino; Silvio D'Innocenzo; Stefano Pisa; Pasqual πŸ“‚ Article πŸ“… 2001 πŸ› John Wiley and Sons 🌐 English βš– 192 KB

## Abstract A nonlinear lumped‐element model of MESFET and HEMT devices whose parameters are empirical functions of instantaneous voltages at the controlling internal nodes has been developed and used to design an __X__‐band hybrid amplifier. Excellent agreement between measurements and simulated p

Accurate GaN HEMT nonquasi-static large-
Accurate GaN HEMT nonquasi-static large-signal model including dispersive effects
✍ Giovanni Crupi; Antonio Raffo; Dominique M. M.-P. Schreurs; Gustavo Avolio; Vale πŸ“‚ Article πŸ“… 2011 πŸ› John Wiley and Sons 🌐 English βš– 797 KB

## Abstract The purpose of this study is to present an advanced technique for accurately modeling the behavior of a GaN HEMT under realistic working conditions. Since this semiconductor transistor technology has demonstrated to be very well suited for high‐frequency (HF) high‐power applications, an

Large-signal modeling methodology for Ga
Large-signal modeling methodology for GaN HEMTs for RF switching-mode power amplifiers design
✍ Anwar Jarndal; Pouya Aflaki; Renato Negra; Ammar B. Kouki; Fadhel M. Ghannouchi πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 466 KB

A large-signal model for GaN HEMT transistor suitable for designing radio frequency power amplifiers (PAs) is presented along with its parameters extraction procedure. This model is relatively easy to construct and implement in CAD software since it requires only DC and S-parameter measurements. The