A detailed description of the flow distribution in the radial impinging-jet (RIJ) cell was attained by solving the governing Navier-Stokes equation numerically. It was shown that for tangential distances r/R < 0.25 the flow configuration in the vicinity of the solid interface approached the stagnati
Kinetically caused saturation in the deposition of particles or cells
β Scribed by R Srinivasan; E Ruckenstein
- Publisher
- Elsevier Science
- Year
- 1981
- Tongue
- English
- Weight
- 593 KB
- Volume
- 79
- Category
- Article
- ISSN
- 0021-9797
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
A recent article by Neumann et al.,l deals with the deposition of pig platelets upon various collector surfaces. These authors performed the experiments for durations of up to 3 h and observed that the deposition saturated at a fractional coverage on each surface at about 11/2 h from the start. Neum
The deposition of polystyrene latex particles of 0.46 Β΅m diameter was studied in situ using a wall-jet cell in combination with total internal reflection microscopy. The particles were deposited onto an indium tin oxide surface in a laminar flow field for up to 13 h. The initial particle flux was fo
Particle deposition in the radial impinging-jet cell for the high coverage regime was studied theoretically and experimentally. A detailed description of the flow distribution in the cell was attained by solving the governing Navier-Stokes equation numerically. The macroscopic flow pattern was decom
The effect of adsorbed whey protein, beta-lactoglobulin, has been investigated on the attachment of polystyrene latex particles to an indium tin oxide (ITO) surface and the subsequent release in anionic surfactant SDS solution and distilled-deionized water at pH 6.0. Experiments were carried out usi